Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Binder-free highly conductive graphene laminate for low cost printed radio frequency applications

Journal Article · · Applied Physics Letters
DOI:https://doi.org/10.1063/1.4919935· OSTI ID:22402469
; ; ;  [1]; ;  [2];  [3];  [4]
  1. School of Electrical and Electronic Engineering, University of Manchester, Manchester (United Kingdom)
  2. BGT Materials Limited, Photon Science Institute, University of Manchester, Manchester M13 9PL (United Kingdom)
  3. Manchester Centre for Mesoscience and Nanotechnology, University of Manchester, Manchester (United Kingdom)
  4. School of Physics and Astronomy, University of Manchester, Manchester (United Kingdom)

In this paper, we demonstrate realization of printable radio frequency identification (RFID) antenna by low temperature processing of graphene ink. The required ultra-low resistance is achieved by rolling compression of binder-free graphene laminate. With compression, the conductivity of graphene laminate is increased by more than 50 times compared to that of as-deposited one. Graphene laminate with conductivity of 4.3 × 10{sup 4 }S/m and sheet resistance of 3.8 Ω/sq (with thickness of 6 μm) is presented. Moreover, the formation of graphene laminate from graphene ink reported here is simple and can be carried out in low temperature (100 °C), significantly reducing the fabrication costs. A dipole antenna based on the highly conductive graphene laminate is further patterned and printed on a normal paper to investigate its RF properties. The performance of the graphene laminate antenna is experimentally measured. The measurement results reveal that graphene laminate antenna can provide practically acceptable return loss, gain, bandwidth, and radiation patterns, making it ideal for low cost printed RF applications, such as RFID tags and wearable wireless sensor networks.

OSTI ID:
22402469
Journal Information:
Applied Physics Letters, Journal Name: Applied Physics Letters Journal Issue: 20 Vol. 106; ISSN APPLAB; ISSN 0003-6951
Country of Publication:
United States
Language:
English

Similar Records

Laser‐Induced Graphene Composites for Printed, Stretchable, and Wearable Electronics
Journal Article · Mon May 20 00:00:00 EDT 2019 · Advanced Materials Technologies · OSTI ID:1514728

Dry electrodes with a printed cellulose–graphene ink for low-profile strain sensors in electromyography
Journal Article · Mon Feb 24 23:00:00 EST 2025 · Journal of Materials Chemistry C · OSTI ID:2573731