Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Electron-stimulated desorption from polished and vacuum fired 316LN stainless steel coated with Ti-Zr-Hf-V

Journal Article · · Journal of Vacuum Science and Technology. A, Vacuum, Surfaces and Films
DOI:https://doi.org/10.1116/1.4897932· OSTI ID:22320370
; ;  [1]
  1. ASTeC, STFC Daresbury Laboratory, Daresbury, Warrington, WA4 4AD Cheshire (United Kingdom)

In this study, two identical 316LN stainless steel tubular samples, which had previously been polished and vacuum-fired and then used for the electron-stimulated desorption (ESD) experiments, were coated with Ti-Zr-Hf-V with different morphologies: columnar and dense. ESD measurement results after nonevaporable getter (NEG) activation to 150, 180, 250, and 350 °C indicated that the values for the ESD yields are significantly (2–20 times) lower than the data from our previous study with similar coatings on nonvacuum-fired samples. Based on these results, the lowest pressure and best long-term performance in particle accelerators will be achieved with a vacuum-fired vacuum chamber coated with dense Ti-Zr-Hf-V coating activated at 180 °C. This is likely due to the following facts: after NEG activation, the hydrogen concentration inside the NEG was lower than in the bulk stainless steel substrate; the NEG coating created a barrier for gas diffusion from the sample bulk to vacuum; the dense NEG coating performed better as a barrier than the columnar NEG coating.

OSTI ID:
22320370
Journal Information:
Journal of Vacuum Science and Technology. A, Vacuum, Surfaces and Films, Journal Name: Journal of Vacuum Science and Technology. A, Vacuum, Surfaces and Films Journal Issue: 6 Vol. 32; ISSN 0734-2101; ISSN JVTAD6
Country of Publication:
United States
Language:
English

Similar Records

Effect of surface polishing and vacuum firing on electron stimulated desorption from 316LN stainless steel
Journal Article · Mon Sep 01 00:00:00 EDT 2014 · Journal of Vacuum Science and Technology. A, Vacuum, Surfaces and Films · OSTI ID:22318062

Influence of deposition pressure and pulsed dc sputtering on pumping properties of Ti-Zr-V nonevaporable getter films
Journal Article · Fri May 15 00:00:00 EDT 2009 · Journal of Vacuum Science and Technology. A, International Journal Devoted to Vacuum, Surfaces, and Films · OSTI ID:22050987

Studies of thin films of Ti- Zr -V as non-evaporable getter films prepared by RF sputtering
Journal Article · Mon Feb 04 23:00:00 EST 2013 · AIP Conference Proceedings · OSTI ID:22113519