Monte Carlo simulation of the data acquisition chain of scintillation detectors
- Uppsala University, Department of Physics and Astronomy, Division of Applied Nuclear Physics, 75120 Uppsala (Sweden)
The good performance of a detector can be strongly affected by the instrumentation used to acquire the data. The possibility of anticipating how the acquisition chain will affect the signal can help in finding the best solution among different set-ups. In this work we developed a Monte Carlo code that aims to simulate the effect of the various components of a digital Data Acquisition system (DAQ) applied to scintillation detectors. The components included in the model are: the scintillator, the photomultiplier tube (PMT), the signal cable and the digitizer. We benchmarked the code against real data acquired with a NE213 scintillator, comparing simulated and real signal pulses induced by gamma-ray interaction. Then we studied the dependence of the energy resolution of a pulse height spectrum (PHS) on the sampling frequency and the bit resolution of the digitizer. We found that exceeding some values of the sampling frequency and the bit resolution improves only marginally the performance of the system. The method can be applied for the study of various detector systems relevant for nuclear techniques, such as in fusion diagnostics.
- OSTI ID:
- 22308271
- Journal Information:
- AIP Conference Proceedings, Vol. 1612, Issue 1; Conference: International conference on fusion reactor diagnostics, Varenna (Italy), 9-13 Sep 2013; Other Information: (c) 2014 AIP Publishing LLC; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
- Country of Publication:
- United States
- Language:
- English
Similar Records
LabVIEW DAQ for NE213 Neutron Detector
The digital optical module - How IceCube will acquire data