Mechanical properties of Al-Cu alloy-SiC composites
Journal Article
·
· AIP Conference Proceedings
- Jurusan Fisika, FMIPA Universitas Negeri Jakarta, 13220 (Indonesia)
- PPS Ilmu Material, Department Fisika, FMIPA, Universitas Indonesia (Indonesia)
The synthesis of aluminum (Al) alloys, Al-Cu, from mixture 96.2 % Al and 3.8 % Cu has been prepared by melting process at a temperature of 1200°C. The adding 12.5 wt% up to 20 wt% of SiC on Al-Cu alloys samples has been investigated. The structure analyses were examined by X-Ray Diffractometer (XRD) and scanning electron microscope (SEM). Moreover, the morphology of Al-Cu alloys has been seen as structure in micrometer range. The hardness was measured by hardness Vickers method. According to the results, it can be assumed that the 15 wt% of SiC content is prefer content to get better quality of back to back hardness Vickers of Al-Cu alloys.
- OSTI ID:
- 22307895
- Journal Information:
- AIP Conference Proceedings, Journal Name: AIP Conference Proceedings Journal Issue: 1 Vol. 1617; ISSN APCPCS; ISSN 0094-243X
- Country of Publication:
- United States
- Language:
- English
Similar Records
On the infiltration behavior of Al, Al-Li, and Mg melts through SiC{sub p} bed
Effect of magnesium on the aging behavior of Al-Zn-Mg-Cu/Al{sub 2}O{sub 3} metal matrix composites
Nanostructured Al{sub 2}O{sub 3}-TiO{sub 2} coatings for high-temperature protection of titanium alloy during ablation
Journal Article
·
Fri Dec 31 23:00:00 EST 1999
· Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science
·
OSTI ID:20014066
Effect of magnesium on the aging behavior of Al-Zn-Mg-Cu/Al{sub 2}O{sub 3} metal matrix composites
Journal Article
·
Mon Jul 01 00:00:00 EDT 1996
· Metallurgical Transactions, A
·
OSTI ID:282246
Nanostructured Al{sub 2}O{sub 3}-TiO{sub 2} coatings for high-temperature protection of titanium alloy during ablation
Journal Article
·
Sun Aug 15 00:00:00 EDT 2010
· Materials Characterization
·
OSTI ID:22066266