Evaluation of subsurface oxygen sensors for remediation monitoring
Continuous remediation monitoring using sensors is potentially a more effective and inexpensive alternative to current methods of sample collection and analysis. Gaseous components of a system are the most mobile and easiest to monitor. Continuous monitoring of soil gases such as oxygen, carbon dioxide, and contaminant vapors can provide important quantitative information regarding the progress of bioremediation efforts and the area of influence of air sparging or soil venting. Laboratory and field tests of a commercially available oxygen sensor show that the subsurface oxygen sensor provides rapid and accurate data on vapor phase oxygen concentrations. The sensor is well suited for monitoring gas flow and oxygen consumption in the vadose zone during air sparging and bioventing. The sensor performs well in permeable, unsaturated soil environments and recovers completely after being submerged during temporary saturated conditions. Calibrations of the in situ oxygen sensors were found to be stable after one year of continuous subsurface operation. However, application of the sensor in saturated soil conditions is limited. The three major advantages of this sensor for in situ monitoring are as follows: (1) it allows data acquisition at any specified time interval; (2) it provides potentially more accurate data by minimizing disturbance of subsurface conditions; and (3) it minimizes the cost of field and laboratory procedures involved in sample retrieval and analysis.
- Sponsoring Organization:
- USDOE
- OSTI ID:
- 215591
- Journal Information:
- Ground Water Monitoring and Remediation, Vol. 16, Issue 1; Other Information: PBD: Win 1996
- Country of Publication:
- United States
- Language:
- English
Similar Records
Field Validation of the NUFT Code for Subsurface Remediation by Soil Vapor Extraction
Immunological techniques as tools to characterize the subsurface microbial community at a trichloroethylene contaminated site