An in-plane tensile test for rheological and formability identification: comparison between experimental and numerical FLC
- Universite Europeenne de Bretagne (France)
Both accurate constitutive laws and formability limits of materials are essential for a numerical optimization of sheet forming processes. To identify these behaviors, experimental databases are needed. In this work, experiments are performed from a biaxial device able to give for a unique in-plane specimen a good prediction of rheological parameters and formability. The proposed device is a servo-hydraulic testing machine provided with four independent dynamic actuators. By localizing necking in the central zone of the specimen, the strain path in this zone is controlled by the speed ratio between the two axes and the whole forming limit diagram can be covered. The experimental forming limit curve for the aluminium alloy AA5086 is determined thanks to a rigorous procedure for detecting the onset of necking in the specimen. Material parameters (constants of both hardening law and anisotropic yield criterion) are identified from the global measurement of force versus displacement curves by means of an inverse analysis procedure. Comparison between experimental and numerical forming limit curves are presented. For the numerical FLCs, two sets of material parameters are compared, the former is identified through the classical uniaxial test and the latter thanks to the dedicated cruciform specimen.
- OSTI ID:
- 21516730
- Journal Information:
- AIP Conference Proceedings, Vol. 1353, Issue 1; Conference: ESAFORM 2011: 14. international ESAFORM conference on material forming, Belfast, Northern Ireland (United Kingdom), 27-29 Apr 2011; Other Information: DOI: 10.1063/1.3589735; (c) 2011 American Institute of Physics; ISSN 0094-243X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Numerical and experimental investigations into Tailored Welded Blanks formability
Forming Limit Predictions for the Serrated Strain Paths in Single Point Incremental Sheet Forming