skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Routeing of power lines through least-cost path analysis and multicriteria evaluation to minimise environmental impacts

Journal Article · · Environmental Impact Assessment Review
 [1];  [2];  [2]
  1. GECOsistema s.r.l., Viale Carducci 15, 47023 Cesena (Italy)
  2. Department of Civil and Environmental Engineering, University of Trento, Via Mesiano 77, 38050 Trento (Italy)

Least-cost path analysis (LCPA) allows designers to find the 'cheapest' way to connect two locations within a cost surface, which can be computed by combining multiple criteria, and therefore by accounting for different issues (environmental impact, economic investment, etc.). This procedure can be easily implemented with modern Geographic Information System (GIS) technologies, and consequently it has been widely employed to support planning and design of different types of linear infrastructures, ranging from roads to pipelines. This paper presents an approach based on the integration of multicriteria evaluation (MCE) and LCPA to identify the most suitable route for a 132 kV power line. Criteria such as cost, visibility, population density, and ecosystem naturalness were used for the analysis. Firstly, spatial MCE and LCPA were combined to generate cost surfaces, and to identify alternative paths. Subsequently, MCE was used to compare the alternatives, and rank them according to their overall suitability. Finally, a sensitivity analysis allowed the stability of the results to be tested and the most critical factors of the evaluation to be detected. The study found that small changes in the location of the power line start and end points can result in significantly different paths, and consequently impact levels. This suggested that planners should always consider alternative potential locations of terminals in order to identify the best path. Furthermore, it was shown that the use of different weight scenarios may help making the model adaptable to varying environmental and social contexts. The approach was tested on a real-world case study in north-eastern Italy.

OSTI ID:
21499671
Journal Information:
Environmental Impact Assessment Review, Vol. 31, Issue 3; Other Information: DOI: 10.1016/j.eiar.2010.10.003; PII: S0195-9255(10)00139-3; Copyright (c) 2010 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.; ISSN 0195-9255
Country of Publication:
United States
Language:
English