Ti : sapphire laser pumped by the second harmonic of a pulsed diode-pumped Nd : YAG laser for two-photon spectroscopy

Journal Article · Tue Mar 31 00:00:00 EDT 2009 · Quantum Electronics (Woodbury, N.Y.)

DOI:https://doi.org/10.1070/QE2009V039N03ABEH013963· OSTI ID:21466474

Donin, Valerii I; Yakovin, Dmitrii V; Gribanov, A V ^[1]

---

1. Institute of Automation and Electrometry, Siberian Branch, Russian Academy of Sciences, Novosibirsk (Russian Federation)

The characteristics of a ring Ti : sapphire laser with gain modulation and frequency tuning using a prism beamsplitter are presented. The output pulse duration was about 50 ns at a pulse repetition rate of 7 - 18 kHz, and the frequency tuning range was 30 nm. The radiation bandwidth of the laser with a 0.7-mm-thick intracavity Fabry - Perot etalon was 12 GHz. The maximum average output power reached 160 mW at the pump power of 4.5 W and the pulse repetition rate of 7 kHz. As a pump laser, we used a diode-pumped frequency-doubled Q-switched Nd :YAG laser. (lasers)

• OSTI ID: 21466474
• Journal Information: Quantum Electronics (Woodbury, N.Y.), Vol. 39, Issue 3; Other Information: DOI: 10.1070/QE2009v039n03ABEH013963; ISSN 1063-7818
• Country of Publication: United States
• Language: English

Related Subjects

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND TECHNOLOGY
DIODE-PUMPED SOLID STATE LASERS
FABRY-PEROT INTERFEROMETER
GHZ RANGE
KHZ RANGE
MODULATION
NEODYMIUM LASERS
PHOTONS
PRISMS
PULSES
Q-SWITCHING
SAPPHIRE
SPECTROSCOPY
TUNING
BOSONS
CORUNDUM
ELEMENTARY PARTICLES
FREQUENCY RANGE
INTERFEROMETERS
LASERS
MASSLESS PARTICLES
MEASURING INSTRUMENTS
MINERALS
OXIDE MINERALS
SOLID STATE LASERS