skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Intensity-Modulated Advanced X-ray Source (IMAXS) for Homeland Security Applications

Journal Article · · AIP Conference Proceedings
DOI:https://doi.org/10.1063/1.3120115· OSTI ID:21289610
 [1]; ;  [2];  [3]
  1. Rapiscan Laboratories, Inc., Sunnyvale, CA 94085 (United States)
  2. HESCO/PTSE Inc., Alameda, CA 94501 (United States)
  3. Schonberg Research Corporation, Los Altos, CA 94023 (United States)

X-ray cargo inspection systems for the detection and verification of threats and contraband require high x-ray energy and high x-ray intensity to penetrate dense cargo. On the other hand, low intensity is desirable to minimize the radiation footprint. A collaboration between HESCO/PTSE Inc., Schonberg Research Corporation and Rapiscan Laboratories, Inc. has been formed in order to design and build an Intensity-Modulated Advanced X-ray Source (IMAXS). Such a source would allow cargo inspection systems to achieve up to two inches greater imaging penetration capability, while retaining the same average radiation footprint as present fixed-intensity sources. Alternatively, the same penetration capability can be obtained as with conventional sources with a reduction of the average radiation footprint by about a factor of three. The key idea is to change the intensity of the source for each x-ray pulse based on the signal strengths in the inspection system detector array during the previous pulse. In this paper we describe methods to accomplish pulse-to-pulse intensity modulation in both S-band (2998 MHz) and X-band (9303 MHz) linac sources, with diode or triode (gridded) electron guns. The feasibility of these methods has been demonstrated. Additionally, we describe a study of a shielding design that would allow a 6 MV X-band source to be used in mobile applications.

OSTI ID:
21289610
Journal Information:
AIP Conference Proceedings, Vol. 1099, Issue 1; Conference: CAARI 2008: 12. international conference on application of accelerators in research and industry, Fort Worth, TX (United States), 10-15 Aug 2008; Other Information: DOI: 10.1063/1.3120115; (c) 2009 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
Country of Publication:
United States
Language:
English