skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Development of a high-brightness and low-divergence lithium neutral beam for a Zeeman polarimetry on JT-60U

Journal Article · · Review of Scientific Instruments
DOI:https://doi.org/10.1063/1.2964225· OSTI ID:21266421
; ; ;  [1];  [2];  [3]
  1. Japan Atomic Energy Agency, Naka, Ibaraki 311-0193 (Japan)
  2. National Institution of Fusion Science, Toki, Gifu 509-5292 (Japan)
  3. Plasma Research Center, University of Tsukuba, Tsukuba, Ibaraki 305-8577 (Japan)

A high-brightness and low-divergence neutral beam is obtained for a Zeeman polarimetry of edge plasmas on JT-60U. The electron density and the pitch angle of the magnetic field line, thus the plasma current density distribution, can be measured by the Zeeman polarimetry using the lithium beam. A thermionic ion source heated by an electron beam is developed in order to obtain the ion beam current extraction over 10 mA. The beam optics is designed after detailed numerical simulation taking the space charge effects into account because a low-divergence angle of the neutral lithium beam leads to a narrow spectrum of the beam emission. It is also necessary to keep the beam radius small for good spatial resolution due to a long beam line of 6.5 m. The newly developed ion gun is operated on a test stand which simulates the diagnostic arrangement on JT-60U. The ion beam current of 10 mA at a beam energy of 10 keV is successfully extracted from the ion source operated at the temperature over 1300 deg. C and focused by Einzel lens. The full width at half maximum radius of the ion beam at the neutralizer is about 9 mm. A sodium vapor neutralizer neutralizes the collimated ion beam fully at the temperature of 300 deg. C. The neutral beam profiles are measured at two locations of the beam line at Z=2.3 m (beam monitor position) and Z=6.5 m (plasma region). The half-width at half maximum radius of the neutral beam of 26 mm and the equivalent beam current of 3 mA with the beam divergence angle of 0.2 deg. which is the half-angle divergence are obtained. Those parameters satisfy the requirements of the Zeeman polarimetry. Furthermore, a long pulse extraction with a current of 10 mA and duration of 50 s is attained.

OSTI ID:
21266421
Journal Information:
Review of Scientific Instruments, Vol. 79, Issue 9; Other Information: DOI: 10.1063/1.2964225; (c) 2008 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0034-6748
Country of Publication:
United States
Language:
English

Similar Records

Zeeman polarimetry measurement for edge current density determination using Li-beam probe on JT-60U
Journal Article · Mon Mar 15 00:00:00 EDT 2010 · Review of Scientific Instruments · OSTI ID:21266421

Non-inductive current drive and profile control in JT-60U
Journal Article · Fri Sep 01 00:00:00 EDT 1995 · AIP Conference Proceedings · OSTI ID:21266421

JT-60U latest results and future prospects
Journal Article · Wed Jul 01 00:00:00 EDT 1992 · Physics of Fluids B; (United States) · OSTI ID:21266421