Parametric study of solid amine sorbents for the capture of carbon dioxide
- United States Department of Energy, Pittsburgh, PA (United States). National Energy Technology Laboratory
Solid amine sorbents were prepared using mixtures of linear and branched primary, secondary, and tertiary amines. These amines were immobilized within polystyrene (PS)-, silicon dioxide (SiO{sub 2})-, or polymethylmethacrylate (PMMA)-based substrates at various weight ratios. Testing was conducted in various reactor systems, where the reactive water required for the capture of carbon dioxide (CO{sub 2}) was tracked during the adsorption/desorption cycles by mass spectrometer gas analysis. The water management for these sorbents was quantified and used to assess the technical feasibility of the operating conditions for the capture of CO{sub 2} from simulated flue gas streams. In addition, the heats of reaction and performance capture loading capacities of these sorbents were also determined by differential scanning calorimetry (DSC) and thermogravimetric analyses (TGAs), respectively, in both dry and humidified CO{sub 2} gas streams. The regenerable solid amine sorbents investigated in this study exhibit acceptable CO{sub 2}-capture loading capacities of 2.5-3.5 mol of CO{sub 2}/kg of sorbent by TGA and a laboratory-scale fixed-bed reactor. These sorbents were stable over the adsorption/desorption temperature range of 25-105{sup o}C for 10 cyclic tests. According to the DSC analysis, the heat of reaction generated by these sorbents was in the range of 400-600 Btu/lb. CO{sub 2}, which will require a reactor with heat management capabilities. 6 refs., 4 figs., 3 tabs.
- OSTI ID:
- 21261675
- Journal Information:
- Energy and Fuels, Vol. 23, Issue 10; ISSN 0887-0624
- Country of Publication:
- United States
- Language:
- English
Similar Records
A Study in Process Modeling of the Startup of Fuel Cell/Gas Turbine Hybrid Systems
Performance of immobilized tertiary amine solid sorbents for the capture of carbon dioxide