skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Effect on plasma and etch-rate uniformity of controlled phase shift between rf voltages applied to powered electrodes in a triode capacitively coupled plasma reactor

Journal Article · · Journal of Vacuum Science and Technology. A, International Journal Devoted to Vacuum, Surfaces, and Films
DOI:https://doi.org/10.1116/1.3010717· OSTI ID:21194987
; ; ; ; ;  [1]
  1. Mechatronics and Manufacturing Technology Center, Samsung Electronics Co. Ltd., 416 Maetan-3 dong, Yeongtong-Gu, Suwon, Gyeonggi-Do, 443-742 (Korea, Republic of)

The influence of the phase shift between rf voltages applied to the powered electrodes on plasma parameters and etch characteristics was studied in a very high-frequency (VHF) capacitively coupled plasma (CCP) triode reactor. rf voltages at 100 MHz were simultaneously applied to the top and bottom electrodes having a controlled phase shift between them, which could be varied between 0 deg. and 360 deg. Several plasma and process characteristics were measured as a function of the phase shift: (i) radial profiles of plasma-emission intensity, (ii) line-of-sight averaged plasma-emission intensity, and (iii) radial profiles of blanket SiO{sub 2} etching rate over a 300 mm wafer. Radial profiles of plasma emission were obtained using the scanning optical probe. It has been shown that all the measured characteristics strongly depend on the phase shift: (i) plasma-emission intensity is minimal at phase shift equal to 0 deg. and maximal at 180 deg. for all radial positions, while the emission radial profile changes from bell-shaped distribution with considerable nonuniformity at 0 deg. to a much more flattened distribution at 180 deg.; (ii) line-of-sight averaged plasma-emission intensity shows a similar dependence on the phase shift with minimum and maximum at 0 deg. and 180 deg., respectively; and (iii) the etch-rate radial profile at 180 deg. shows a much better uniformity as compared to that at 0 deg. Some of these results can be qualitatively explained by the redistribution of plasma currents that flow between the electrodes and also from the electrodes to the grounded wall with the phase shift. We suggest that the phase-shift effect can be used to improve the plasma and etch-rate spatial uniformity in VHF-CCP triode reactors.

OSTI ID:
21194987
Journal Information:
Journal of Vacuum Science and Technology. A, International Journal Devoted to Vacuum, Surfaces, and Films, Vol. 27, Issue 1; Other Information: DOI: 10.1116/1.3010717; (c) 2009 American Vacuum Society; Country of input: International Atomic Energy Agency (IAEA); ISSN 1553-1813
Country of Publication:
United States
Language:
English

Similar Records

Plasma uniformity and phase-controlled etching in a very high frequency capacitive discharge
Journal Article · Wed Jul 15 00:00:00 EDT 2009 · Journal of Applied Physics · OSTI ID:21194987

Control of plasma uniformity in a capacitive discharge using two very high frequency power sources
Journal Article · Sat Aug 01 00:00:00 EDT 2009 · Journal of Applied Physics · OSTI ID:21194987

Effects of interelectrode gap on high frequency and very high frequency capacitively coupled plasmas
Journal Article · Wed Jul 15 00:00:00 EDT 2009 · Journal of Vacuum Science and Technology. A, International Journal Devoted to Vacuum, Surfaces, and Films · OSTI ID:21194987