Carbonation and pH in mortars manufactured with supplementary cementitious materials
- Queens University Belfast, Belfast (United Kingdom)
An investigation of carbonation in mortars and methods of measuring the degree of carbonation and pH change is presented. The mortars were manufactured using ordinary portland cement, pulverized fuel ash, ground granulated blast-furnace slag, metakaolin, and microsilica. The mortars were exposed to a carbon dioxide-rich environment (5% CO{sub 2}) to accelerate carbonation. The resulting carbonation was measured using phenolphthalein indicator and thermogravimetric analysis. The pH of the pore fluid and a powdered sample, extracted from the mortar, was measured to give an accurate indication of the actual pH of the concrete. The pH of the extracted powder mortar sample was found to be similar to the pH of the pore fluid expressed from the mortars. The thermogravimetric analysis suggested two distinct regions of transport of CO{sub 2} within mortar, a surface region where convection was prevalent and a deeper region where diffusion was dominant. The use of microsilica has been shown to decrease the rate of carbonation, while pulverized fuel ash and ground granulated blast-furnace slag have a detrimental effect on carbonation. Metakaolin has little effect on carbonation.
- OSTI ID:
- 21187166
- Journal Information:
- Journal of Materials in Civil Engineering, Journal Name: Journal of Materials in Civil Engineering Journal Issue: 5 Vol. 21; ISSN JMCEE7; ISSN 0899-1561
- Country of Publication:
- United States
- Language:
- English
Similar Records
Experimental studies and thermodynamic modeling of the carbonation of Portland cement, metakaolin and limestone mortars
Carbonation and porosity of mortar specimens with pozzolanic and hydraulic cement admixtures