The effects of nozzle height and orifice size on spray evaporation heat transfer performance for a low-finned, triangular-pitch tube bundle with R-134a
- Trane Co., La Crosse, WI (United States)
- Iowa State Univ., Ames, IA (United States). Mechanical Engineering Dept.
The heat transfer performance for a 1,575 fins/m (40 fpi) triangular-pitch tube bundle in a spray evaporation environment with R-134a was investigated. Shell-side heat transfer coefficients were measured through a heat flux range of 40.2 kW/m{sup 2} (12.8 {times} 10{sup 3} Btu/[h{center_dot}ft{sup 2}]) to 19.2 kW/m{sup 2} (6.1 {times} 10{sup 3} Btu/[h{center_dot}ft{sup 2}]). Both circular and rectangular spray patterns were evaluated at nozzle heights of 66.7 mm (25/8 in.) and 41.3 mm (15/8 in.) over the tube bundle. It was found that several nozzle configurations yielded shell-side heat transfer coefficients higher than those found in the pool-boiling test. Bundle heat transfer performance showed dependence on the nozzle orifice size and wall heat flux, with only a weak dependence on the type of spray patterns and the nozzle height over the top row. It was determined with collectors tests that orifice size directly affected the amount of refrigerant contacting the tube bundle.
- OSTI ID:
- 211816
- Report Number(s):
- CONF-950624--
- Country of Publication:
- United States
- Language:
- English
Similar Records
Shell-side condensation heat transfer of R-134a. Part 2: Enhanced tube performance
The effect of R-134a inundation on enhanced tube geometries