Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Fine and ultrafine particles generated during fluidized bed combustion of different solid fuels

Journal Article · · Environmental Engineering Science
DOI:https://doi.org/10.1089/ees.2007.0192· OSTI ID:21149569
; ; ;  [1]
  1. CNR, Rome (Italy). Institute of Research for Combustion
The paper reports an experimental study carried out with a 110-mm ID fluidized bed combustor focused on the characterization of particulates formation/emission during combustion of coal and non-fossil solid fuels. Fuels included: a bituminous coal, a commercial predried and granulated sludge (GS), a refuse-derived fuel (RDF), and a biomass waste (pine seed shells). Stationary combustion experiments were carried out analyzing the fate of fuel ashes. Fly ashes collected at the combustor exhaust were characterized both in terms of particle size distribution and chemical composition, with respect to both trace and major elements. Tapping-Mode Atomic Force Microscopy (TM-AFM) technique and high-efficiency cyclone-type collector devices were used to characterize the size and morphology of the nanometric-and micronic-size fractions of fly ash emitted at the exhaust respectively. Results showed that during the combustion process: I) the size of the nanometric fraction ranges between 2 and 65 nm; ii) depending on the fuel tested, combustion-assisted attrition or the production of the primary ash particles originally present in the fuel particles, are responsible of fine particle generation. The amount in the fly ash of inorganic compounds is larger for the waste-derived fuels, reflecting the large inherent content of these compounds in the parent fuels.
OSTI ID:
21149569
Journal Information:
Environmental Engineering Science, Journal Name: Environmental Engineering Science Journal Issue: 10 Vol. 25; ISSN 1092-8758; ISSN EESCF5
Country of Publication:
United States
Language:
English