skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Pushover, Response Spectrum and Time History Analyses of Safe Rooms in a Poor Performance Masonry Building

Journal Article · · AIP Conference Proceedings
DOI:https://doi.org/10.1063/1.2963809· OSTI ID:21148955
 [1]
  1. Department of Civil Engineering, Shahid Rajaee University, P.O. Box 16785-163, Tehran (Iran, Islamic Republic of)

The idea of safe room has been developed for decreasing the earthquake casualties in masonry buildings. The information obtained from the previous ground motions occurring in seismic zones expresses the lack of enough safety of these buildings against earthquakes. For this reason, an attempt has been made to create some safe areas inside the existing masonry buildings, which are called safe rooms. The practical method for making these safe areas is to install some prefabricated steel frames in some parts of the existing structure. These frames do not carry any service loads before an earthquake. However, if a devastating earthquake happens and the load bearing walls of the building are destroyed, some parts of the floors, which are in the safe areas, will fall on the roof of the installed frames and the occupants who have sheltered there will survive. This paper presents the performance of these frames located in a destroying three storey masonry building with favorable conclusions. In fact, the experimental pushover diagram of the safe room located at the ground-floor level of this building is compared with the analytical results and it is concluded that pushover analysis is a good method for seismic performance evaluation of safe rooms. For time history analysis the 1940 El Centro, the 2003 Bam, and the 1990 Manjil earthquake records with the maximum peak accelerations of 0.35g were utilized. Also the design spectrum of Iranian Standard No. 2800-05 for the ground kind 2 is used for response spectrum analysis. The results of time history, response spectrum and pushover analyses show that the strength and displacement capacity of the steel frames are adequate to accommodate the distortions generated by seismic loads and aftershocks properly.

OSTI ID:
21148955
Journal Information:
AIP Conference Proceedings, Vol. 1020, Issue 1; Conference: 2008 seismic engineering conference: Commemorating the 1908 Messina and Reggio Calabria earthquake, Reggio Calabria (Italy), 8-11 Jul 2008; Other Information: DOI: 10.1063/1.2963809; (c) 2008 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
Country of Publication:
United States
Language:
English