Experimental study on thermophoretic deposition of soot particles in laminar diffusion flames along a solid wall in microgravity
- School of Mechanical and Aerospace Engineering, Seoul National University, Seoul 151-742 (Korea)
- Division of Mechanical and Space Engineering, Hokkaido University, Sapporo 060-8628 (Japan)
- Laboratoire E.M2.C., UPR 288 C.N.R.S Ecole Centrale Paris, Grande Voie des Vignes 92295 (France)
Soot deposition process in diffusion flames along a solid wall has been investigated experimentally under a microgravity environment. An ethylene (C{sub 2}H{sub 4}) diffusion flame was formed around a cylindrical rod-burner with the surrounding air velocities of V{sub a} = 2.5, 5, and 10 cm/s, the oxygen concentration of 35%, and the burner wall temperature of 300 K. A laser extinction method was adopted to measure the distribution of soot volume fraction. The experiments determined the trace of maximum soot concentration together with the relative distance of the trace of flame. Results showed that the distance was about 2-5 mm. As the surrounding air velocity increased, the region of the soot particle distribution moved closer to the burner wall. The soot particles near the flame zone tended to move away from the flame zone because of the thermophoretic force and to concentrate at a certain narrow region inside the flame. Because of the simultaneous effects of convection and the thermophoresis, soot particles finally adhered to the burner wall. It has been found that there existed an optimal air velocity for the early deposition of soot on the furnace wall. (author)
- OSTI ID:
- 21116043
- Journal Information:
- Experimental Thermal and Fluid Science, Journal Name: Experimental Thermal and Fluid Science Journal Issue: 8 Vol. 32; ISSN 0894-1777; ISSN ETFSEO
- Country of Publication:
- United States
- Language:
- English
Similar Records
Agglomeration of soot particles in diffusion flames under microgravity
Soot formation in laminar premixed ethylene/air flames at atmospheric pressure