Investigation of Asphalt Mixture Creep Behavior Using Thin Beam Specimens
- Department of Civil Engineering, University of Minnesota 500 Pillsbury Drive SE, Minneapolis, MN 55455 (United States)
The asphalt pavement layer consists of two or more lifts of compacted asphalt mixture; the top of the layer is also exposed to aging, a factor that significantly affects the mixture properties. The current testing specifications use rather thick specimens that cannot be used to investigate the gradual change in properties with pavement depth. This paper investigates the feasibility of using the 3-point bending test with thin asphalt mixture beams (127x12.7x6.35 mm) to determine the low-temperature creep compliance of the mixtures. Several theoretical and semi-empirical models, from the theory of composites, are reviewed and evaluated using numerical and experimental data. Preliminary results show that this method can be used for low-temperature mixture characterization but several crucial factors need further inspection and interpretation.
- OSTI ID:
- 21055275
- Journal Information:
- AIP Conference Proceedings, Vol. 973, Issue 1; Conference: M and FGM 2006: Conference on multiscale and funtionally graded materials 2006, Oahu Island, HI (United States), 15-18 Oct 2006; Other Information: DOI: 10.1063/1.2896870; (c) 2008 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Asphalt additives in thick hot mixed asphalt-concrete pavements. Research report (Interim), Sep 86-Oct 90
Asphalt pavement surfaces and asphalt mixtures. Transportation research record