Ultra Stable Capacitor charging Power Supply of Klystron-Modulator for PAL XFEL
- Pohang Accelerator Laboratory, San-31, Hyoja-Dong, Pohang, Kyungbuk 790-784, S. (Korea, Republic of)
The PAL (Pohang Accelerator Laboratory) 2.5-GeV linac is planed to be converted to a SASE-XFEL facility (PAL XFEL) that supplies coherent X-rays down to 0.3-nm wavelength. The electron beams has to have an emittance of 1.0 mm-mrad, a peak current of 3 kA, and a low energy spread of 1.0 MeV. In order to provide reasonably stable SASE output, the RF stability of 0.02% rms is required for both RF phase and amplitude. This stability is mainly determined by a low level RF drive system and klystron-modulators. The stability level of the modulator has to be improved 10 times better to meet the pulse stability of 0.02%. This is a technologically challenging issue for PAL XFEL. An inverter technology is to be applied to charge the PFN of a new modulator. Therefore, a new inverter system should provide very stable charging performances. This paper presents the development of an ultra stable klystron-modulator with an inverter power.
- OSTI ID:
- 21043427
- Journal Information:
- AIP Conference Proceedings, Vol. 879, Issue 1; Conference: 9. international conference on synchrotron radiation instrumentation, Daegu (Korea, Republic of), 28 May - 2 Jun 2006; Other Information: DOI: 10.1063/1.2436054; (c) 2007 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Physics Requirements of PAL-XFEL Undulator
Development of a pulse modulator to drive 6.19 MW klystron for 15 MeV electron linac