A Helical Coolant Channel Design for the Solid Wall Blanket
- University of Wisconsin-Madison (United States)
A helical coolant channel scheme is proposed for the APEX solid wall blanket module. The self-coolant breeder in this system is FLIBE (LiF)2(BeF2). The structural material is the nanocomposited alloy 12YWT. The neutron multiplier used in the current design is either stationary or slow moving liquid lead. The purpose of this study is to design a blanket that can handle a high wall loading (5 MW/m{sup 2}). In the mean time the design provides means to attain the maximum possible blanket outlet temperature and meet all engineering limits on temperature of structural material and liquids. An important issue for such a design is to optimize the system for minimum pressure loss. For advanced ferritic steel (12YWT) an upper temperature limit of 800 deg. C is expected, and a limit of 700 deg. C at the steel/FLIBE interface is recommended.The blanket module is composed of two main continuous routes. The first route is three helical rectangular channels side-by-side that surround a central box. The helical channels are fed from the bottom and exit at the top to feed the central channels in the central box. The coolant helical channels have a cross sectional area with a length of about 10 cm and a width that changes according to the position around the central box. For instance: the width of the coolant channels facing the plasma is the narrowest while it is the widest in the back (farthest from the plasma).In this design the coolant runs around the central box for only 5 turns to cover the total height of the first wall (6.8 m). The design is optimized with the FW channel width as a parameter with the heat transfer requirements at the first wall as the constraints.
- OSTI ID:
- 20849491
- Journal Information:
- Fusion Science and Technology, Journal Name: Fusion Science and Technology Journal Issue: 1 Vol. 44; ISSN 1536-1055
- Country of Publication:
- United States
- Language:
- English
Similar Records
MHD Effects on Heat Transfer in a Molten Salt Blanket
A Lithium Self-Cooled Blanket for the HAPL Conceptual Inertial Confinement Reactor