Double-Null Divertor Design for JT-60SU, A 10-MA Class Long-Pulse Tokamak
- General Atomics (United States)
- Japan Atomic Energy Research Institute (Japan)
The design of a double-null divertor for use in JT-60SU is presented. The free-boundary equilibrium code EFIT is used to establish a symmetric highly triangular double-null plasma shape. The baffle shapes are highly contoured to match the equilibrium, with the plasma-facing surfaces intersecting the flux surfaces at steep angles in the regions of high heat flux. These contoured surfaces also provide a tightly baffled design with small-aperture pumping gaps near both the inner and outer divertor strike points. The gaps provide adequate throughput of D{sub 2} gas for active control of impurity entrainment at reasonable pressures. The structural design is shown to be consistent with both forces from disruptions and thermal stress during vacuum vessel bakeout.
- OSTI ID:
- 20845776
- Journal Information:
- Fusion Science and Technology, Vol. 39, Issue 1; Other Information: Copyright (c) 2006 American Nuclear Society (ANS), United States, All rights reserved. http://epubs.ans.org/; Country of input: International Atomic Energy Agency (IAEA); ISSN 1536-1055
- Country of Publication:
- United States
- Language:
- English
Similar Records
Recent results of JT-60U
Initial Study Comparing the Radiating Divertor Behavior in Single-Null and Double-Null Plasmas in DIII-D