Modeling of Melt Droplet Fragmentation Following Vapor Film Destabilization by a Trigger Pulse
- Tokyo University (Japan)
- CEA Grenoble (France)
In hypothetical Severe Accident studies for a PWR, a large amount of molten corium may be poured into water. There is then a risk of Steam Explosion. After the premixing sequence in which the melt is more or less dispersed into water, a fine fragmentation process may start, which can lead to an escalation. Such an event is generally triggered by the destabilization of the vapor film surrounding the hot melt droplets. In this paper, an attempt to describe all the successive processes leading to this fine fragmentation is presented.First, a critical analysis of previous models is performed, allowing us to propose a new sequence of events. As in the previous models, the film destabilization leads to the growth of cold liquid peaks induced by Rayleigh Taylor instability. As these peaks have a smaller density than the drop, they do not penetrate into the hot drop. At the cold liquid-hot liquid contacts, transient heat transfer leads to the explosive boiling of a small amount of coolant. The generated local pressurization deforms the hot melt interface. This can produce fine fragments from the filaments issued from the melt. Some of them may reach the vapor-coolant interface where intense and rapid vaporization occurs. A large bubble then develops, and a new fragmentation sequence may again appear at the bubble collapse. The present model is supported by experimental results.
- OSTI ID:
- 20837805
- Journal Information:
- Nuclear Technology, Vol. 144, Issue 2; Other Information: Copyright (c) 2006 American Nuclear Society (ANS), United States, All rights reserved. http://epubs.ans.org/; Country of input: International Atomic Energy Agency (IAEA); ISSN 0029-5450
- Country of Publication:
- United States
- Language:
- English
Similar Records
Thermal-hydraulic behaviors of vapor-liquid interface due to arrival of a pressure wave
Single-droplet vapor-explosion experiments