Noninvasive determination of optical lever sensitivity in atomic force microscopy
- Centre for Research on Adaptive Nanodevices and Nanostructures (CRANN), University of Dublin, Trinity College, Dublin 2 (Ireland)
Atomic force microscopes typically require knowledge of the cantilever spring constant and optical lever sensitivity in order to accurately determine the force from the cantilever deflection. In this study, we investigate a technique to calibrate the optical lever sensitivity of rectangular cantilevers that does not require contact to be made with a surface. This noncontact approach utilizes the method of Sader et al. [Rev. Sci. Instrum. 70, 3967 (1999)] to calibrate the spring constant of the cantilever in combination with the equipartition theorem [J. L. Hutter and J. Bechhoefer, Rev. Sci. Instrum. 64, 1868 (1993)] to determine the optical lever sensitivity. A comparison is presented between sensitivity values obtained from conventional static mode force curves and those derived using this noncontact approach for a range of different cantilevers in air and liquid. These measurements indicate that the method offers a quick, alternative approach for the calibration of the optical lever sensitivity.
- OSTI ID:
- 20778560
- Journal Information:
- Review of Scientific Instruments, Vol. 77, Issue 1; Other Information: DOI: 10.1063/1.2162455; (c) 2006 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0034-6748
- Country of Publication:
- United States
- Language:
- English
Similar Records
Lateral force calibration in atomic force microscopy: A new lateral force calibration method and general guidelines for optimization
Spring constant calibration of atomic force microscope cantilevers of arbitrary shape