Estimating model parameters for an impact-produced shock-wave simulation: Optimal use of partial data with the extended Kalman filter
- Los Alamos National Laboratory, Applied Physics Division, P.O. Box 1663, MS T086, Los Alamos, NM 87545 (United States)
- University of California at Los Angeles (United States)
This paper builds upon our recent data assimilation work with the extended Kalman filter (EKF) method [J. Kao, D. Flicker, R. Henninger, S. Frey, M. Ghil, K. Ide, Data assimilation with an extended Kalman filter for an impact-produced shock-wave study, J. Comp. Phys. 196 (2004) 705-723.]. The purpose is to test the capability of EKF in optimizing a model's physical parameters. The problem is to simulate the evolution of a shock produced through a high-speed flyer plate. In the earlier work, we have showed that the EKF allows one to estimate the evolving state of the shock wave from a single pressure measurement, assuming that all model parameters are known. In the present paper, we show that imperfectly known model parameters can also be estimated accordingly, along with the evolving model state, from the same single measurement. The model parameter optimization using the EKF can be achieved through a simple modification of the original EKF formalism by including the model parameters into an augmented state variable vector. While the regular state variables are governed by both deterministic and stochastic forcing mechanisms, the parameters are only subject to the latter. The optimally estimated model parameters are thus obtained through a unified assimilation operation. We show that improving the accuracy of the model parameters also improves the state estimate. The time variation of the optimized model parameters results from blending the data and the corresponding values generated from the model and lies within a small range, of less than 2%, from the parameter values of the original model. The solution computed with the optimized parameters performs considerably better and has a smaller total variance than its counterpart using the original time-constant parameters. These results indicate that the model parameters play a dominant role in the performance of the shock-wave hydrodynamic code at hand.
- OSTI ID:
- 20767048
- Journal Information:
- Journal of Computational Physics, Vol. 214, Issue 2; Other Information: DOI: 10.1016/j.jcp.2005.10.022; PII: S0021-9991(05)00470-5; Copyright (c) 2005 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved; Country of input: International Atomic Energy Agency (IAEA); ISSN 0021-9991
- Country of Publication:
- United States
- Language:
- English
Similar Records
Markov Models and the Ensemble Kalman Filter for Estimation of Sorption Rates
A Multi-Model Adaptive Kalman Filtering Approach to Power System Dynamic State Estimation