Low-energy ion beamline scattering apparatus for surface science investigations
- Division of Chemistry and Chemical Engineering, California Institute of Technology, Pasadena, California 91125 (United States)
We report on the design, construction, and performance of a high current (monolayers/s), mass-filtered ion beamline system for surface scattering studies using inert and reactive species at collision energies below 1500 eV. The system combines a high-density inductively coupled plasma ion source, high-voltage floating beam transport line with magnet mass-filter and neutral stripping, decelerator, and broad based detection capabilities (ions and neutrals in both mass and energy) for products leaving the target surface. The entire system was designed from the ground up to be a robust platform to study ion-surface interactions from a more global perspective, i.e., high fluxes (>100 {mu}A/cm{sup 2}) of a single ion species at low, tunable energy (50-1400{+-}5 eV full width half maximum) can be delivered to a grounded target under ultrahigh vacuum conditions. The high current at low energy problem is solved using an accel-decel transport scheme where ions are created at the desired collision energy in the plasma source, extracted and accelerated to high transport energy (20 keV to fight space charge repulsion), and then decelerated back down to their original creation potential right before impacting the grounded target. Scattered species and those originating from the surface are directly analyzed in energy and mass using a triply pumped, hybrid detector composed of an electron impact ionizer, hemispherical electrostatic sector, and rf/dc quadrupole in series. With such a system, the collision kinematics, charge exchange, and chemistry occurring on the target surface can be separated by fully analyzing the scattered product flux. Key design aspects of the plasma source, beamline, and detection system are emphasized here to highlight how to work around physical limitations associated with high beam flux at low energy, pumping requirements, beam focusing, and scattered product analysis. Operational details of the beamline are discussed from the perspective of available beam current, mass resolution, projectile energy spread, and energy tunability. As well, performance of the overall system is demonstrated through three proof-of-concept examples: (1) elastic binary collisions at low energy (2) core-level charge exchange reactions involving {sup 20}Ne{sup +} with Mg/Al/Si/P targets, and (3) reactive scattering of CF{sub 2}{sup +}/CF{sub 3}{sup +} off Si. These studies clearly demonstrate why low, tunable incident energy, as well as mass and energy filtering of products leaving the target surface is advantageous and often essential for studies of inelastic energy losses, hard-collision charge exchange, and chemical reactions that occur during ion-surface scattering.
- OSTI ID:
- 20723092
- Journal Information:
- Review of Scientific Instruments, Vol. 76, Issue 8; Other Information: DOI: 10.1063/1.1994987; (c) 2005 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0034-6748
- Country of Publication:
- United States
- Language:
- English
Similar Records
Energy distribution of negative O sup minus and OH sup minus ions emitted from YBaCuO and iron garnet targets by dc and rf magnetron sputtering
Characterisation Of The Beam Plasma In High Current, Low Energy Ion Beams For Implanters