Effects of physical properties of components on reactive nanolayer joining

Journal Article · Wed Jun 01 04:00:00 EDT 2005 · Journal of Applied Physics

DOI:https://doi.org/10.1063/1.1915540· OSTI ID:20711730

Wang, J; Besnoin, E; Knio, O M; Weihs, T P ^[1]

---

1. Department of Materials Science and Engineering, Johns Hopkins University, Baltimore, Maryland 21218 (United States)

We studied the effects of the physical properties of components on a reactive joining process that uses freestanding nanostructured Al/Ni multilayer foils as local heat sources to melt AuSn solder layers and thereby bond the components. Stainless-steel reactive joints were compared with Al reactive joints. The strengths of both the stainless-steel and the Al joints increase as the foil thickness and thus the total heat of reaction increases until the foil thickness reaches a critical value. For foils thicker than the critical value, the shear strengths are constant at approximately 48 and 32 MPa for the stainless-steel joints and Al joints, respectively. The critical foil thickness for stainless-steel joining is 40 {mu}m, compared with 80 {mu}m for the joining of Al. Numerical studies of heat transfer during reactive joining and the experimental results suggest that the duration of melting of the AuSn solder is shorter when Al specimens are joined. Thus, a thicker foil is required to enable a sufficient duration (0.5 ms) of melting of the AuSn solder and full wetting of the metallic samples in order to form a strong joint. In general, when components with higher thermal conductivity, higher heat capacity, and higher density are joined, the duration of melting of the solder or braze layer is shorter and therefore a thicker foil is required to ensure the formation of a strong joint.

• OSTI ID: 20711730
• Journal Information: Journal of Applied Physics, Journal Name: Journal of Applied Physics Journal Issue: 11 Vol. 97; ISSN JAPIAU; ISSN 0021-8979
• Country of Publication: United States
• Language: English

Related Subjects

36 MATERIALS SCIENCE
71 CLASSICAL AND QUANTUM MECHANICS
GENERAL PHYSICS
ALUMINIUM
FOILS
GOLD ALLOYS
HEAT SOURCES
HEAT TRANSFER
JOINTS
LAYERS
MELTING
NANOSTRUCTURES
NICKEL
NUMERICAL ANALYSIS
PRESSURE RANGE MEGA PA 10-100
REACTION HEAT
SHEAR PROPERTIES
SPECIFIC HEAT
STAINLESS STEELS
THERMAL CONDUCTIVITY
THICKNESS
TIN ALLOYS