Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Signal Processing Effects for Ultrasonic Guided Wave Scanning of Composites

Journal Article · · AIP Conference Proceedings
DOI:https://doi.org/10.1063/1.1916793· OSTI ID:20655323
 [1]; ;  [2];  [3];  [4]
  1. NASA Glenn Research Center, Cleveland, OH 44135 (United States)
  2. Cleveland State University, Cleveland, OH 44120 (United States)
  3. Michigan Technological University, Houghton, MI 49931 (United States)
  4. Florida A and M University - Florida State University, Tallahassee, FL 32310 (United States)

The goal of this ongoing work is to optimize experimental variables for a guided wave scanning method to obtain the most revealing and accurate images of defect conditions in composite materials. This study focuses on signal processing effects involved in forming guided wave scan images. Signal processing is involved at two basic levels for deriving ultrasonic guided wave scan images. At the primary level, NASA GRC has developed algorithms to extract over 30 parameters from the multimode signal and its power spectral density. At the secondary level, there are many variables for which values must be chosen that affect actual computation of these parameters. In this study, a ceramic matrix composite sample having a delamination is characterized using the ultrasonic guided wave scan method. Energy balance and decay rate parameters of the guided wave at each scan location are calculated to form images. These images are compared with ultrasonic c-scan and thermography images. The effect of the time portion of the waveform processed on image quality is assessed by comparing with images formed using the total waveform acquired.

OSTI ID:
20655323
Journal Information:
AIP Conference Proceedings, Journal Name: AIP Conference Proceedings Journal Issue: 1 Vol. 760; ISSN APCPCS; ISSN 0094-243X
Country of Publication:
United States
Language:
English

Similar Records

Non-destructive evaluation of composites
Conference · Wed Jan 31 23:00:00 EST 1996 · OSTI ID:402036

Thermography inspection for detection and tracking of composite cylinder damage during load testing
Journal Article · Thu Jun 23 00:00:00 EDT 2011 · AIP Conference Proceedings · OSTI ID:21511642

Ultrasonic analysis of Kevlar-epoxy filament wound structures
Conference · Tue Jul 16 00:00:00 EDT 1985 · OSTI ID:5235096