Design Modifications, Fabrication and Test of HFDB-03 Racetrack Magnet Wound with Pre-Reacted Nb3Sn Rutherford Cable
Journal Article
·
· AIP Conference Proceedings
- Fermi National Accelerator Laboratory, P.O. Box 500, Batavia, IL 60510 (United States)
A 10 T racetrack magnet (HFDB-03) wound with pre-reacted Nb3Sn Rutherford cable has been fabricated and tested at Fermilab. This magnet is the third one in a proof-of-principle series for the use of the React-and-Wind technology in common-coil dipole magnets for future accelerators. It consists of two flat racetrack coils (28 turns each) separated by 5 mm. The maximum field on the coil, at the short sample limit of 16530 A, is 10 tesla. The cable has 41 strands with 0.7 mm diameter and the minimum bend radius in the magnet ends is 90 mm. The predecessor of this magnet (HFDB-02) reached 78 % of the short sample limit at 7.7 T. The mechanical design was improved and the fabrication procedure was slightly modified in order to address possible causes of limitation. In this paper we present the mechanical design and analysis of HFDB-03, the modifications to the fabrication procedure and the test results.
- OSTI ID:
- 20653186
- Journal Information:
- AIP Conference Proceedings, Journal Name: AIP Conference Proceedings Journal Issue: 1 Vol. 710; ISSN APCPCS; ISSN 0094-243X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Design modifications, fabrication and test of HFDB-03 racetrack magnet wound with pre-reacted Nb3Sn Rutherford cable
Fabrication and test of a racetrack magnet using pre-reacted Nb3Sn cable
Development and test of single-layer common coil dipole wound with reacted Nb3Sn cable
Conference
·
Tue Oct 07 00:00:00 EDT 2003
·
OSTI ID:816044
Fabrication and test of a racetrack magnet using pre-reacted Nb3Sn cable
Conference
·
Tue Dec 10 23:00:00 EST 2002
·
OSTI ID:805775
Development and test of single-layer common coil dipole wound with reacted Nb3Sn cable
Conference
·
Tue Apr 27 00:00:00 EDT 2004
·
OSTI ID:823127