Performance and Applications of the first HVE 5MV Tandetron{sup TM} at the University of Madrid
- High Voltage Engineering Europa B.V., Amersfoort, The Netherlands (Netherlands)
- Centro de Micro-Analisis de Materiales, Universidad Autonoma de Madrid (Spain)
The first HVE Tandetron{sup TM} with a nominal terminal voltage of 5 MV has been put into operation at the Universidad Autonoma de Madrid (Spain) as part of their new IBA facility. The accelerator features a coaxial structure in which the all-solid-state power supply is constructed around the high-energy acceleration tube, thereby avoiding the T-shaped tank that has characterized the HVE Tandetrons{sup TM} so far. The new IBA facility covers a number of different ion beam analysis techniques including ERD using heavy-element time-of-flight, RBS, as well as an external micro-beam for PIXE. During installation, tests have shown a stable terminal voltage of 5.5 MV. The terminal voltage ripple was deduced to be below 6 x 10-6 (RMS) for terminal voltages above 800 kV. Terminal voltage undershoot was measured to be 1.4 x 10-3 for a {approx}1 kW beam at 3 MV and recovered to 1 x 10-4 within 800 ms. IBA experiments that require low energy hydrogen beams are supported by a stable terminal voltage down to 100 kV.
- OSTI ID:
- 20634265
- Journal Information:
- AIP Conference Proceedings, Vol. 680, Issue 1; Conference: 17. international conference on the application of accelerators in research and industry, Denton, TX (United States), 12-16 Nov 2002; Other Information: DOI: 10.1063/1.1619877; (c) 2003 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Design And Performance Of A 3 MV Tandetron Accelerator System For High-Current Applications
Accelerator System Development at High Voltage Engineering