Coupled-Multiplier Accelerator Produces High-Power Electron Beams for Industrial Applications
- Department of Physics, Texas A and M University (United States)
The coupled multiplier is a new approach to efficient generation of MeV d.c. power for accelerator applications. High voltage is produced by a series of modules, each of which consists of a high-power alternator, step-up transformer, and 3-phase multiplier circuit. The alternators are connected mechanically along a rotating shaft, and connected by insulating flexible couplers. This approach differs from all previous d.c. technologies in that power is delivered to the various stages of the system mechanically, rather than through capacitive or inductive electrical coupling. For this reason the capital cost depends linearly on required voltage and power, rather than quadratically as with conventional technologies. The CM technology enables multiple electron beams to be driven within a common supply and insulating housing. MeV electron beam is extremely effective in decomposing organic contaminants in water. A 1 MeV, 100 kW industrial accelerator using the CM technology has been built and is being installed for treatment of wastewater at a petrochemical plant.
- OSTI ID:
- 20634263
- Journal Information:
- AIP Conference Proceedings, Vol. 680, Issue 1; Conference: 17. international conference on the application of accelerators in research and industry, Denton, TX (United States), 12-16 Nov 2002; Other Information: DOI: 10.1063/1.1619875; (c) 2003 American Institute of Physics; Country of input: International Atomic Energy Agency (IAEA); ISSN 0094-243X
- Country of Publication:
- United States
- Language:
- English
Similar Records
Design of a low-cost, compact SRF accelerator for flue gas and wastewater treatment
Design of a cw, low-energy, high-power superconducting linac for environmental applications