Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Demonstration of Better than Diesel Efficiency and Soot Emissions using Gasoline Compression Ignition in a Light Duty Engine with a Fuel Pressure Limitation

Conference · · SAE Technical Paper Series
DOI:https://doi.org/10.4271/2021-01-0518· OSTI ID:2007402

Increasing regulatory demand to reduce CO2 emissions has led to a focus on advanced combustion strategy development to improve overall engine efficiency. Gasoline compression ignition (GCI) has been demonstrated by others to have the potential to meet future CO2 regulations and emissions while achieving comparable to better efficiency than conventional diesel compression ignition (DCI). Soot and NOx emissions are also reduced significantly by using gasoline instead of diesel in compression ignition engines due to differences in composition, fuel properties, and reactivity. In comparison with diesel fuel, gasoline has a higher volatility and more resistance to autoignition, therefore, its longer ignition delay time will allow for better mixing of the air-fuel charge before combustion. In this study, a GCI combustion system has been tested in a Hyundai 2.2L engine as part of a US Department of Energy funded project. A double-injection strategy was tested from mid-to-high loads (5-20 bar BMEP) and for engine speeds in the range of 1200-3000 rpm. Up to 43.4% brake thermal efficiency was achieved using the GCI mode versus 41% using DCI mode. The GCI mode has demonstrated two distinct strategies that work at different load ranges, partially premixed compression ignition (PPCI) and mixing-controlled compression ignition (MCCI). Overall, this study shows that for similar engine-out NOx levels, GCI mode had higher brake thermal efficiency than DCI with lower fuel pressure and EGR required.

Research Organization:
Hyundai America Technical Center, Inc.
Sponsoring Organization:
USDOE Office of Energy Efficiency and Renewable Energy (EERE)
DOE Contract Number:
EE0008478
OSTI ID:
2007402
Report Number(s):
DOE-SAE-8478-2
Journal Information:
SAE Technical Paper Series, Journal Name: SAE Technical Paper Series; ISSN 0148-7191
Country of Publication:
United States
Language:
English

References (13)

A Study of Injection Strategy to Achieve High Load Points for Gasoline Compression Ignition (GCI) Operation conference October 2017
Advancement of GDCI Engine Technology for US 2025 CAFE and Tier 3 Emissions conference April 2018
Partially Premixed Combustion at High Load using Gasoline and Ethanol, a Comparison with Diesel conference April 2009
Chemical kinetics of hydrocarbon ignition in practical combustion systems journal January 2000
Development of a Gasoline Direct Injection Compression Ignition (GDCI) Engine journal April 2014
Gasoline Direct Injection Compression Ignition (GDCI) - Diesel-like Efficiency with Low CO2 Emissions journal April 2011
Parametric Study of Ignition and Combustion Characteristics From a Gasoline Compression Ignition Engine Using Two Different Reactivity Fuels conference October 2016
Impact of Multiple Injection Strategies on Efficiency and Combustion Characteristics in an Optical PPC Engine conference April 2020
Transition from HCCI to PPC: Investigation of the Effect of Different Injection Timing on Ignition and Combustion Characteristics in an Optical PPC Engine conference April 2020
Ethanol Kinetic Model Development and Validation at Wide Ranges of Mixture Temperatures, Pressures, and Equivalence Ratios journal June 2019
Partially Pre-Mixed Auto-Ignition of Gasoline to Attain Low Smoke and Low NOx at High Load in a Compression Ignition Engine and Comparison with a Diesel Fuel conference January 2007
Advantages of Fuels with High Resistance to Auto-ignition in Late-injection, Low-temperature, Compression Ignition Combustion conference October 2006
Review of Oxidation of Gasoline Surrogates and Its Components journal December 2018