Deformation and fracture of a directionally solidified NiAl-28Cr-6Mo eutectic alloy
A directionally solidified alloy based on the NiAl-(Cr, Mo) eutectic was examined by transmission and scanning electron microscopy to characterize the microstructure and room temperature deformation and fracture behavior. The microstructure consisted of a lamellar morphology with a group of zone axes (111) growth direction for both the NiAl and (Cr, Mo) phases. The interphase boundary between the eutectic phases was semicoherent and composed of a well-defined dislocation network. In addition, a fine array of coherent NiAl precipitates was dispersed throughout the (Cr, Mo) phase. The eutectic morphology was stable at 1300 K with only coarsening of the NiAl precipitates occurring after heat treatment for 1.8 ks (500 h). Fracture of the aligned eutectic is characterized primarily by a crack bridging/renucleation mechanism and is controlled by the strength of the semicoherent interface between the two phases. However, contributions to the toughness of the eutectic may arise from plastic deformation of the NiAl phase and the geometry associated with the fracture surface.
- Research Organization:
- Tennessee Univ., Knoxville, TN (United States). Dept. of Chemistry
- OSTI ID:
- 200610
- Report Number(s):
- N--96-17777; NASA-CR--200016; NAS--1.26:200016; NIPS--96-07174; CNN: NAG3-876
- Country of Publication:
- United States
- Language:
- English
Similar Records
The fracture resistance of directionally solidified dual-phase NiAl reinforced with refractory metals
Creep in Directionally Solidified NiAl-Mo Eutectics