Development of approximate method to analyze the characteristics of latent heat thermal energy storage system

Conference · Thu Jul 01 04:00:00 EDT 1999

OSTI ID:20034216

Saitoh, T S; Hoshi, Akira

Third Conference of the Parties to the U.N. Framework Convention on Climate Change (COP3) held in last December in Kyoto urged the industrialized nation to reduce carbon dioxide (CO{sub 2}) emissions by 5.2 percent (on the average) below 1990 level until the period between 2008 and 2012 (Kyoto protocol). This implies that even for the most advanced countries like the US, Japan, and EU implementation of drastic policies and overcoming many barriers in market should be necessary. One idea which leads to a path of low carbon intensity is to adopt an energy storage concept. One of the reasons that the efficiency of the conventional energy systems has been relatively low is ascribed to lacking of energy storage subsystem. Most of the past energy systems, for example, air-conditioning system, do not have energy storage part and the system usually operates with low energy efficiency. Firstly, the effect of reducing CO{sub 2} emissions was also examined if the LHTES subsystems were incorporated in all the residential and building air-conditioning systems. Another field of application of the LHTES is of course transportation. Future vehicle will be electric or hybrid vehicle. However, these vehicles will need considerable energy for air-conditioning. The LHTES system will provide enough energy for this purpose by storing nighttime electricity or rejected heat from the radiator or motor. Melting and solidification of phase change material (PCM) in a capsule is of practical importance in latent heat thermal energy storage (LHTES) systems which are considered to be very promising to reduce a peak demand of electricity in the summer season and also reduce carbon dioxide (CO{sub 2}) emissions. Two melting modes are involved in melting in capsules. One is close-contact melting between the solid bulk and the capsule wall, and another is natural convection melting in the liquid (melt) region. Close-contact melting processes for a single enclosure have been solved using several numerical methods (e.g. Saitoh and Kato, 1994). In addition, close-contact melting heat transfer characteristics including melt flow in the liquid film under inner wall temperature distribution were analyzed and simple approximate equations were already presented by Saitoh and Hoshi (1997). In this paper, the authors will propose an analytical solution on combined close-contact and natural convection melting in horizontal cylindrical and spherical capsules, which is useful for the practical capsule bed LHTES system.

• Research Organization: Tohoku Univ., Sendai (JP)
• OSTI ID: 20034216
• Country of Publication: United States
• Language: English

Related Subjects

25 ENERGY STORAGE
29 ENERGY PLANNING, POLICY, AND ECONOMY
32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION
AIR CONDITIONING
ANALYTICAL SOLUTION
ENERGY EFFICIENCY
ENVIRONMENTAL IMPACTS
LATENT HEAT STORAGE
MELTING
PHASE CHANGE MATERIALS
POWER DEMAND
THERMAL ENERGY STORAGE EQUIPMENT