Impingement heat transfer within arrays of circular jets including the effect of crossflow
Conference
·
OSTI ID:20030494
The purpose of this work is to investigate the heat transfer and the flow characteristics for the arrays of impingement jets taking into consideration the effect of the crossflow. In this experiment, two types of the crossflow schemes, referred to as the minimum crossflow and the maximum crossflow by the Obot et al. (1987), were examined. In the case of the maximum crossflow, the exhaust air was restricted by the side wall to leave through one side of the jet array. In the case of the minimum crossflow, the side wall was removed, and the exhaust air flowed away through all four edges of the jet array. To examine the flow pattern of the exhaust air, the flow visualization by the smoke flow was carried out. The air after impinging to the target surface was entrained into the downstream adjacent jet. The exhaust air was discharged to the outside of array through two ways: One was that the air was discharged to outside by entraining into the downstream adjacent jet. The other was that the exhaust air was discharged along the endwall surface on the mid-span of adjacent jets. The thermosensitive liquid crystal sheet was applied to measure the temperature distributions and to obtain the local heat transfer coefficients on the impingement surface. The local Nusselt number distribution for the maximum crossflow was hardly decreased in the downstream rows, although the velocity of the exhaust air increased. In the downstream row, however, the distribution of the local Nusselt number is non-circular shape because of the exhaust air. The averaged Nusselt number for the maximum crossflow was slightly lower than that in the case of minimum crossflow.
- Research Organization:
- Kansai Univ., Suita, Osaka (JP)
- OSTI ID:
- 20030494
- Country of Publication:
- United States
- Language:
- English
Similar Records
Effects of crossflow temperature on heat transfer within an array of impinging jets
Enhanced jet impingement heat transfer with crossflow at low Reynolds numbers
Heat transfer characteristics within an array of impinging jets. Effects of crossflow temperature relative to jet temperature. Final Report
Journal Article
·
Sat Jan 31 23:00:00 EST 1987
· Journal of Heat Transfer (Transcations of the ASME (American Society of Mechanical Engineers), Series C); (United States)
·
OSTI ID:5482761
Enhanced jet impingement heat transfer with crossflow at low Reynolds numbers
Book
·
Mon Dec 30 23:00:00 EST 1996
·
OSTI ID:428141
Heat transfer characteristics within an array of impinging jets. Effects of crossflow temperature relative to jet temperature. Final Report
Technical Report
·
Tue Oct 01 00:00:00 EDT 1985
·
OSTI ID:5971719