Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Variation of slow strain rate test fracture mode of type 304L stainless steel in 288 C water

Journal Article · · Corrosion (Houston)
DOI:https://doi.org/10.5006/1.3280523· OSTI ID:20014472
Potentiostatic slow strain rate tests (SSRT) were performed to investigate the susceptibility to intergranular stress corrosion cracking (IGSCC) of type 304L (UNS S30403) stainless steel (SS) in 299 C water, focusing on corrosion potential and the degree of sensitization. The degrees of sensitization was examined by means of metallographic observation, double-loop electrochemical potentiokinetic reactivation (DL-EPR) technique, and grain boundary analysis with a transmission electron microscopy. The SSRT fracture mode changed from ductile {r{underscore}arrow} transgranular stress corrosion cracking (TGSCC) {r{underscore}arrow} TGSCC (granulated) {r{underscore}arrow} IGSCC, with increasing corrosion potential, water conductivity, and the electrochemical potentiokinetic reactivation (EPR) value. The IGSCC onset occurred at 375 mV vs. standard hydrogen electrode (SHE) of corrosion potential for type 304L SS with the EPR value > 3%, but it did not occur when the EPR value < 1%. Even though the microstructure exhibited a step structure, slight chromium depletion and the precipitation of Cr{sub 23}C{sub 6} were observed at grain boundaries after sensitization heat treatment. The variation of minimum corrosion potential for IGSCC onset is presented semi-quantitatively, considering the effects of aqueous impurity and degree of sensitization.
Research Organization:
Toshiba Corp., Yokohama (JP)
OSTI ID:
20014472
Journal Information:
Corrosion (Houston), Journal Name: Corrosion (Houston) Journal Issue: 1 Vol. 56; ISSN 0010-9312; ISSN CORRAK
Country of Publication:
United States
Language:
English