Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

In situ STM study of Cu(111) surface structure and corrosion in pure and benzotriazole-containing sulfuric acid solution

Journal Article · · Journal of Physical Chemistry B: Materials, Surfaces, Interfaces, amp Biophysical
DOI:https://doi.org/10.1021/jp991903l· OSTI ID:20013649

The authors present results of an in situ STM study on the surface structure and anodic dissolution of Cu(111) electrodes in pure 0.01 M H{sub 2}SO{sub 4} solution and in solution containing the corrosion inhibitor benzotriazole (BTAH), which is aimed at an atomistic understanding of the dissolution process and the inhibitor effects. The initial stages of Cu dissolution as well as the adsorption of BTAH are pronouncedly influenced by the presence of the ordered sulfate adlayer, which forms in the double layer potential regime and induces a reconstruction of the underlying Cu surface layer, together with a reorientation of the steps along the close-packed lattice directions. Cu dissolution in pure H{sub 2}SO{sub 4} solution proceeds by a step flow mechanism. The onset of dissolution is critically affected by the relative orientation of the sulfate adlayer on the lower terrace side, with the stability being highest for steps running perpendicular to the close-packed sulfate rows. The retracting steps often expose apparently disordered areas, which are attributed to a disordered sulfate adlayer on a Cu surface where, because of kinetic limitations, a well-ordered reconstruction has not yet reformed. BTAH adsorption is only observed in the potential regime of the ordered sulfate adlayer. The BTAH adlayer is highly defective, which is attributed to the removal of the reconstruction due to sulfate adlayer displacement. Islands with poorly ordered 1D chain structures are surrounded by areas with no resolved structure. Cu dissolution inhibition is manifested by an anodic shift in the onset of dissolution as well as by the blocking of the step flow etch mechanism, reflecting a stabilization of the Cu steps by adsorbed BTAH. Dissolution at higher potentials proceeds predominantly via formation of monolayer etch pits. When the potential is reversed back into the double layer regime, smoothening of the surface is observed with a rate that increases strongly with decreasing potential.

Research Organization:
Univ. Ulm (DE)
OSTI ID:
20013649
Journal Information:
Journal of Physical Chemistry B: Materials, Surfaces, Interfaces, amp Biophysical, Journal Name: Journal of Physical Chemistry B: Materials, Surfaces, Interfaces, amp Biophysical Journal Issue: 47 Vol. 103; ISSN 1089-5647; ISSN JPCBFK
Country of Publication:
United States
Language:
English

Similar Records

In situ STM study of (100) Cu electrodes in sulfuric acid solution in the presence of benzotriazole: Adsorption, Cu corrosion, and Cu deposition
Journal Article · Thu May 01 00:00:00 EDT 1997 · Journal of the Electrochemical Society · OSTI ID:511930

Corrosion inhibition of copper with benzotriazole and other organic surfactants
Journal Article · Mon May 01 00:00:00 EDT 1995 · Corrosion · OSTI ID:46077

Effects of sulfide ions on the integrity of the protective film of benzotriazole on alpha brass in salt water
Journal Article · Mon May 01 00:00:00 EDT 2000 · Journal of the Electrochemical Society · OSTI ID:20080576