Phase-change wallboard and mechanical night ventilation in commercial buildings: Potential for HVAC system downsizing
As thermal storage media, phase-change materials (PCMs) such as paraffin, eutectic salts, etc. offer an order-of-magnitude increase in thermal storage capacity, and their discharge is almost isothermal. By embedding PCMs in dypsum board, plaster, or other wall-covering materials, the building structure acquires latent storage properties. Structural elements containing PCMs can store large amounts of energy while maintaining the indoor temperature within a relatively narrow range. As heat storage takes place inside the building where the loads occur, rather than at a central exterior location, the internal loads are removed without the need for additional transport energy. Distributed latent storage can thus be used to reduce the peak power demand of a building, downsize the cooling system, and/or switch to low-energy cooling sources. The authors used RADCOOL, a thermal building simulation program based on the finite difference approach, to numerically evaluate the thermal performance of PCM wallboard coupled with mechanical night ventilation in office buildings offers the opportunity for system downsizing in climates where the outside air temperature drops below 18 C at night. In climates where the outside air temperature remains above 19 C at night, the use of PCM wallboard should be coupled with discharge mechanisms other than mechanical night ventilation with outside air.
- Research Organization:
- Lawrence Berkeley National Lab., CA (US)
- OSTI ID:
- 20006334
- Report Number(s):
- CONF-980815-; TRN: IM200007%%390
- Resource Relation:
- Conference: 1998 ACEEE Summer Study on Energy Efficiency in Buildings, Pacific Grove, CA (US), 08/23/1998--08/28/1998; Other Information: 10 volume set available for $200.00; PBD: 1998; Related Information: In: 1998 ACEEE summer study on energy efficiency in buildings: Proceedings, [3100] pages.
- Country of Publication:
- United States
- Language:
- English
Similar Records
Simplified numerical description of latent storage characteristics for phase change wallboard
Combined experimental and numerical evaluation of a prototype nano-PCM enhanced wallboard