Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Aerodynamically induced radial forces in a centrifugal gas compressor: Part 2 -- Computational investigation

Journal Article · · Journal of Engineering for Gas Turbines and Power
DOI:https://doi.org/10.1115/1.2818533· OSTI ID:20006113

Radial loads and direction of a centrifugal gas compressor containing a high specific speed mixed flow impeller and a single tongue volute were determined both experimentally and computationally at both design and off-design conditions. The experimental methodology was developed in conjunction with a traditional ASME PTC-10 closed-loop test to determine radial load and direction. The experimental study is detailed in Part 1 of this paper (Moore and Flathers, 1998). The computational method employs a commercially available, fully three-dimensional viscous code to analyze the impeller and the volute interaction. An uncoupled scheme was initially used where the impeller and volute were analyzed as separate models using a common vaneless diffuser geometry. The two calculations were then repeated until the boundary conditions at a chosen location in the common vaneless diffuser were nearly the same. Subsequently, a coupled scheme was used where the entire stage geometry was analyzed in one calculation, thus eliminating the need for manual iteration of the two independent calculations. In addition to radial load and direction information, this computational procedure also provided aerodynamic stage performance. The effect of impeller front face and rear face cavities was also quantified. The paper will discuss computational procedures, including grid generation and boundary conditions, as well as comparisons of the various computational schemes to experiment. The results of this study will show the limitations and benefits of Computational Fluid Dynamics (CFD) for determination of radial load, direction, and aerodynamic stage performance.

Research Organization:
Solar Turbines Inc., San Diego, CA (US)
OSTI ID:
20006113
Journal Information:
Journal of Engineering for Gas Turbines and Power, Journal Name: Journal of Engineering for Gas Turbines and Power Journal Issue: 4 Vol. 121; ISSN JETPEZ; ISSN 0742-4795
Country of Publication:
United States
Language:
English

Similar Records

Aerodynamically induced radial forces in a centrifugal gas compressor. Part 1: Experimental measurement
Journal Article · Tue Mar 31 23:00:00 EST 1998 · Journal of Engineering for Gas Turbines and Power · OSTI ID:290044

AN AERODYNAMIC-THERMODYNAMIC STUDY OF CENTRIFUGAL COMPRESSORS
Technical Report · Mon Dec 17 23:00:00 EST 1962 · OSTI ID:4770221

Numerical simulation of impeller-volute interaction in centrifugal compressors
Journal Article · Thu Jul 01 00:00:00 EDT 1999 · Journal of Turbomachinery · OSTI ID:679303