Open-die forging of structurally porous sandwich panels
Structurally porous metal sandwich panels consisting of dense face sheets and porous cores of controlled relative density can be manufactured by trapping inert gas during hot isostatic pressing and modifying its distribution via subsequent thermomechanical forming. A plane-strain solution for analyzing the open-die forging of such a plastically compressible sandwich panel is developed. An effective yield potential for the face sheet/core sandwich is constructed from the Mises yield criterion for the rigid-plastic face sheet and Doraivelu et al's density-dependent yield function for the compressible core. This effective constitutive response is used in a classical slab analysis of open-die forging. The analysis predicts the upsetting force and the distributions of pressure, core relative density, and average stresses within both the face sheet and the core. During upsetting, a zone of fully constrained material (i.e., with zero lateral strain) is predicted to occur at the center of the workpiece, and this densifies first. A densification front then advances laterally from the panel center toward the outer edges. The nonuniform densification complicates the use of forging for the production of components requiring a uniform density core.
- Research Organization:
- Univ. of Virginia, Charlottesville, VA (US)
- OSTI ID:
- 20002013
- Journal Information:
- Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science, Journal Name: Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science Journal Issue: 10 Vol. 30; ISSN MMTAEB
- Country of Publication:
- United States
- Language:
- English
Similar Records
Compressive and shear buckling analysis of metal matrix composite sandwich panels under different thermal environments
Sinter-forging characteristics of fine-grained zirconia