Characteristics of the high-rate discharge capability of a nickel/metal hydride battery electrode
The high rate discharge capability of the negative electrode in a Ni/MH battery is mainly determined by the charge transfer process at the interface between the metal hydride (MH) alloy powder and the electrolyte, and the mass transfer process in the bulk MH alloy powder. In this study, the anodic polarization curves of a MH electrode were measured and analyzed. An alloy of nominal composition Mm{sub 0.95}Ti{sub 0.05}Ni{sub 3.85}Co{sub 0.45}Mn{sub 0.35}Al{sub 0.35} was used as the negative electrode material. With increasing number of charge/discharge cycles, the MH alloy powders microcrack into particles several micrometers in diameter. The decrease in the MH alloy particle size results in an increase in both the activation surface area and the exchange current density of the MH alloy electrode. The electrode overpotentials of the MH electrode decreases with increasing number of cycles at a large value of anodic polarization current. The decrease in electrode overpotential leads to an increase in the high rate discharge capability of the MH electrode. By using the limiting current, the hydrogen diffusion coefficient in the MH alloy was estimated to be 1.2 x 10{sup {minus}11}cm{sup 2}s{sup {minus}1} assuming an average particle radius of 5 {micro}m.
- Research Organization:
- Univ. of Windsor, Ontario, (CA)
- OSTI ID:
- 20001068
- Journal Information:
- Journal of the Electrochemical Society, Vol. 146, Issue 10; Other Information: PBD: Oct 1999; ISSN 0013-4651
- Country of Publication:
- United States
- Language:
- English
Similar Records
Studies of electrochemical properties of Ti{sub 0.35}Zr{sub 0.65}Ni{sub x}V{sub 2{minus}x{minus}y}Mn{sub y} alloys with C14 Laves phase for nickel/metal hydride batteries
Advanced nickel-metal hydride cell development. Final report, September 1993--March 1996