Porosity, roughness, and passive film morphology influence the corrosion behavior of 316L stainless steel manufactured by laser powder bed fusion

DelRio, Frank W.; Khan, Ryan M.; Heiden, Michael J.; Kotula, Paul G.; Renner, Peter A.; Karasz, Erin K.; Melia, Michael A.

doi:10.1016/j.jmapro.2023.07.062

Porosity, roughness, and passive film morphology influence the corrosion behavior of 316L stainless steel manufactured by laser powder bed fusion

Journal Article · Fri Sep 01 00:00:00 EDT 2023 · Journal of Manufacturing Processes

DOI:https://doi.org/10.1016/j.jmapro.2023.07.062· OSTI ID:1994900

DelRio, Frank W.; Khan, Ryan M.; Heiden, Michael J.; Kotula, Paul G.; Renner, Peter A.; Karasz, Erin K.; Melia, Michael A.

Not Available

View Journal Article

Sponsoring Organization:: USDOE Office of Science (SC), Basic Energy Sciences (BES); USDOE National Nuclear Security Administration (NNSA)

Grant/Contract Number:: NA0003525

OSTI ID:: 1994900

Alternate ID(s):: OSTI ID: 2317748

Journal Information:: Journal of Manufacturing Processes, Journal Name: Journal of Manufacturing Processes Journal Issue: C Vol. 102; ISSN 1526-6125

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (47)

Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser melting Cherry, J. A.; Davies, H. M.; Mehmood, S. The International Journal of Advanced Manufacturing Technology, Vol. 76, Issue 5-8 https://doi.org/10.1007/s00170-014-6297-2	journal	September 2014
The effect of primary processing parameters on surface roughness in laser powder bed additive manufacturing Whip, Bo; Sheridan, Luke; Gockel, Joy The International Journal of Advanced Manufacturing Technology, Vol. 103, Issue 9-12 https://doi.org/10.1007/s00170-019-03716-z	journal	May 2019
Surface characteristics of laser polished Ti-6Al-4V parts produced by electron beam melting additive manufacturing process Nesli, Safak; Yilmaz, Oguzhan The International Journal of Advanced Manufacturing Technology, Vol. 114, Issue 1-2 https://doi.org/10.1007/s00170-021-06861-6	journal	March 2021
Sliding Wear Characteristics and Corrosion Behaviour of Selective Laser Melted 316L Stainless Steel Sun, Y.; Moroz, A.; Alrbaey, K. Journal of Materials Engineering and Performance, Vol. 23, Issue 2 https://doi.org/10.1007/s11665-013-0784-8	journal	November 2013
Microstructure and Corrosion Resistance of Laser Additively Manufactured 316L Stainless Steel Trelewicz, Jason R.; Halada, Gary P.; Donaldson, Olivia K. JOM, Vol. 68, Issue 3 https://doi.org/10.1007/s11837-016-1822-4	journal	February 2016
Pitting Corrosion in 316L Stainless Steel Fabricated by Laser Powder Bed Fusion Additive Manufacturing: A Review and Perspective Voisin, T.; Shi, R.; Zhu, Y. JOM, Vol. 74, Issue 4 https://doi.org/10.1007/s11837-022-05206-2	journal	March 2022
The surface chemistry of manganiferous silicate minerals as inferred from experiments on tephroite (Mn2SiO4) Casey, William H.; Hochella, Michael F.; Westrich, Henry R. Geochimica et Cosmochimica Acta, Vol. 57, Issue 4 https://doi.org/10.1016/0016-7037(93)90168-V	journal	February 1993
Direct image observation of the initial forming of passive thin film on stainless steel surface by PEEM Kang, Tai-Hee; Ihm, Kyuwook; Hwang, Chan-Cuk Applied Surface Science, Vol. 212-213 https://doi.org/10.1016/S0169-4332(03)00137-5	journal	May 2003
Instability of scan tracks of selective laser sintering of high speed steel powder Niu, H. J.; Chang, I. T. H. Scripta Materialia, Vol. 41, Issue 11 https://doi.org/10.1016/S1359-6462(99)00276-6	journal	November 1999
Identification of MnCr2O4 nano-octahedron in catalysing pitting corrosion of austenitic stainless steels Zheng, S. J.; Wang, Y. J.; Zhang, B. Acta Materialia, Vol. 58, Issue 15 https://doi.org/10.1016/j.actamat.2010.05.043	journal	September 2010
New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion Voisin, Thomas; Forien, Jean-Baptiste; Perron, Aurelien Acta Materialia, Vol. 203 https://doi.org/10.1016/j.actamat.2020.11.018	journal	January 2021
Revealing the superior corrosion protection of the passive film on selective laser melted 316L SS in a phosphate-buffered saline solution Yue, Xiaoqi; Zhang, Lei; Hua, Yong Applied Surface Science, Vol. 529 https://doi.org/10.1016/j.apsusc.2020.147170	journal	November 2020
Mechanism of (Mg,Al,Ca)-oxide inclusion-induced pitting corrosion in 316L stainless steel exposed to sulphur environments containing chloride ion Zheng, Shuqi; Li, Chunyu; Qi, Yameng Corrosion Science, Vol. 67 https://doi.org/10.1016/j.corsci.2012.09.044	journal	February 2013
Kinetics of the oxidation of stainless steel in hot and concentrated nitric acid in the passive and transpassive domains Tcharkhtchi-Gillard, E.; Benoit, M.; Clavier, P. Corrosion Science, Vol. 107 https://doi.org/10.1016/j.corsci.2016.02.031	journal	June 2016
Effect of inclusions modified by rare earth elements (Ce, La) on localized marine corrosion in Q460NH weathering steel Liu, Chao; Revilla, Reynier I.; Liu, Zhiyong Corrosion Science, Vol. 129 https://doi.org/10.1016/j.corsci.2017.10.001	journal	December 2017
Improvement of corrosion resistance of SS316L manufactured by selective laser melting through subcritical annealing Zhou, Chengshuang; Hu, Shiyin; Shi, Qiaoying Corrosion Science, Vol. 164 https://doi.org/10.1016/j.corsci.2019.108353	journal	March 2020
Initial stages of oxide growth on AM stainless steel exposed to a supercritical CO2 environment Melia, Michael A.; Rosenberg, Samantha G.; Kotula, Paul G. Corrosion Science, Vol. 201 https://doi.org/10.1016/j.corsci.2022.110259	journal	June 2022
The transpassive dissolution mechanism of 316L stainless steel Fattah-alhosseini, A.; Saatchi, A.; Golozar, M. A. Electrochimica Acta, Vol. 54, Issue 13 https://doi.org/10.1016/j.electacta.2009.01.040	journal	May 2009
Heat treatment effect on the microstructure and corrosion behavior of 316L stainless steel fabricated by selective laser melting for proton exchange membrane fuel cells Kong, Decheng; Ni, Xiaoqing; Dong, Chaofang Electrochimica Acta, Vol. 276 https://doi.org/10.1016/j.electacta.2018.04.188	journal	June 2018
Microscopic work function anisotropy and surface chemistry of 316L stainless steel using photoelectron emission microscopy Barrett, N.; Renault, O.; Lemaître, H. Journal of Electron Spectroscopy and Related Phenomena, Vol. 195 https://doi.org/10.1016/j.elspec.2014.05.015	journal	August 2014
Selective laser melting of a stainless steel and hydroxyapatite composite for load-bearing implant development Hao, L.; Dadbakhsh, S.; Seaman, O. Journal of Materials Processing Technology, Vol. 209, Issue 17 https://doi.org/10.1016/j.jmatprotec.2009.06.012	journal	August 2009
Influences of process parameters on surface roughness of multi-layer single-pass thin-walled parts in GMAW-based additive manufacturing Xiong, Jun; Li, Yanjiang; Li, Rong Journal of Materials Processing Technology, Vol. 252 https://doi.org/10.1016/j.jmatprotec.2017.09.020	journal	February 2018
Microstructural and mechanical evaluation of post-processed SS 316L manufactured by laser-based powder bed fusion Sohrabpoor, H.; Salarvand, V.; Lupoi, R. Journal of Materials Research and Technology, Vol. 12 https://doi.org/10.1016/j.jmrt.2021.02.090	journal	May 2021
Quantitative multiscale correlative microstructure analysis of additive manufacturing of stainless steel 316L processed by selective laser melting Godec, Matjaž; Zaefferer, Stefan; Podgornik, Bojan Materials Characterization, Vol. 160 https://doi.org/10.1016/j.matchar.2019.110074	journal	February 2020
Processing parameters in laser powder bed fusion metal additive manufacturing Oliveira, J. P.; LaLonde, A. D.; Ma, J. Materials & Design, Vol. 193 https://doi.org/10.1016/j.matdes.2020.108762	journal	August 2020
Correlation between process parameters, microstructure and properties of 316 L stainless steel processed by selective laser melting Kurzynowski, Tomasz; Gruber, Konrad; Stopyra, Wojciech Materials Science and Engineering: A, Vol. 718 https://doi.org/10.1016/j.msea.2018.01.103	journal	March 2018
Understanding surface roughness on vertical surfaces of 316 L stainless steel in laser powder bed fusion additive manufacturing Zhang, Tianyu; Yuan, Lang Powder Technology, Vol. 411 https://doi.org/10.1016/j.powtec.2022.117957	journal	October 2022
On the enhanced corrosion resistance of a selective laser melted austenitic stainless steel Chao, Qi; Cruz, Victor; Thomas, Sebastian Scripta Materialia, Vol. 141 https://doi.org/10.1016/j.scriptamat.2017.07.037	journal	December 2017
Application of Multivariate Statistical Analysis to STEM X-ray Spectral Images: Interfacial Analysis in Microelectronics Kotula, Paul G.; Keenan, Michael R. Microscopy and Microanalysis, Vol. 12, Issue 6 https://doi.org/10.1017/S1431927606060636	journal	October 2006
Redefining passivity breakdown of super duplex stainless steel by electrochemical operando synchrotron near surface X-ray analyses Långberg, Marie; Örnek, Cem; Evertsson, Jonas npj Materials Degradation, Vol. 3, Issue 1 https://doi.org/10.1038/s41529-019-0084-3	journal	May 2019
Corrosion of metallic materials fabricated by selective laser melting Kong, Decheng; Dong, Chaofang; Ni, Xiaoqing npj Materials Degradation, Vol. 3, Issue 1 https://doi.org/10.1038/s41529-019-0086-1	journal	June 2019
How build angle and post-processing impact roughness and corrosion of additively manufactured 316L stainless steel Melia, Michael A.; Duran, Jesse G.; Koepke, Joshua R. npj Materials Degradation, Vol. 4, Issue 1 https://doi.org/10.1038/s41529-020-00126-5	journal	July 2020
The Desorption of Mercury and the work Function of Polycrystalline gold Lawson, R. P. W.; Carter, G. Applied Physics Letters, Vol. 9, Issue 2 https://doi.org/10.1063/1.1754654	journal	July 1966
Impact of grain orientation and phase on Volta potential differences in an additively manufactured titanium alloy Benzing, Jake T.; Maryon, Olivia O.; Hrabe, Nik AIP Advances, Vol. 11, Issue 2 https://doi.org/10.1063/5.0038114	journal	February 2021
The quantitative analysis of thin specimens Cliff, G.; Lorimer, G. W. Journal of Microscopy, Vol. 103, Issue 2 https://doi.org/10.1111/j.1365-2818.1975.tb03895.x	journal	March 1975
Repetitive Nucleation of Corrosion Pits on Stainless Steel and the Effects of Surface Roughness Burstein, G. T.; Vines, S. P. Journal of The Electrochemical Society, Vol. 148, Issue 12 https://doi.org/10.1149/1.1416503	journal	January 2001
Pit Stability Predictions of Additively Manufactured SS316 Surfaces Using Finite Element Analysis Marshall, Rebecca S.; Katona, Ryan M.; Melia, Michael A. Journal of The Electrochemical Society, Vol. 169, Issue 2 https://doi.org/10.1149/1945-7111/ac519d	journal	February 2022
The Role of Microstructure and Surface Finish on the Corrosion of Selective Laser Melted 304L Schaller, Rebecca F.; Mishra, Ajit; Rodelas, Jeffrey M. Journal of The Electrochemical Society, Vol. 165, Issue 5 https://doi.org/10.1149/2.0431805jes	journal	January 2018
Pit Propagation at the Boundary between Manganese Sulfide Inclusions and Austenitic Stainless Steel 303 and the Role of Copper Lillard, R. S.; Kashfipour, M. A.; Niu, W. Journal of The Electrochemical Society, Vol. 163, Issue 8 https://doi.org/10.1149/2.0461608jes	journal	January 2016
On The Corrosion and Metastable Pitting Characteristics of 316L Stainless Steel Produced by Selective Laser Melting Sander, G.; Thomas, S.; Cruz, V. Journal of The Electrochemical Society, Vol. 164, Issue 6 https://doi.org/10.1149/2.0551706jes	journal	January 2017
Effect of surface roughness on fatigue performance of additive manufactured Ti–6Al–4V Greitemeier, D.; Dalle Donne, C.; Syassen, F. Materials Science and Technology, Vol. 32, Issue 7 https://doi.org/10.1179/1743284715Y.0000000053	journal	May 2015
Manganese Ore Decomposition and Carbon Reduction in Steelmaking Wu, Wei; Wang, Peng; Lin, Lu High Temperature Materials and Processes, Vol. 37, Issue 8 https://doi.org/10.1515/htmp-2017-0042	journal	June 2018
Solidification Phase and Microstructure Selection Maps for Fe-Cr-Ni Alloys. Fukumoto, Shigeo; Kurz, Wilfried ISIJ International, Vol. 39, Issue 12 https://doi.org/10.2355/isijinternational.39.1270	journal	January 1999
Phase Equilibria of the MnO-SiO2-CrOx System at 1873 K under Controlled Oxygen Partial Pressure. Tanahashi, Mitsuru; Furuta, Nobuo; Yamauchi, Chikabumi ISIJ International, Vol. 41, Issue 11 https://doi.org/10.2355/isijinternational.41.1309	journal	January 2001
A Critical Review on Effect of Process Parameters on Mechanical and Microstructural Properties of Powder-Bed Fusion Additive Manufacturing of SS316L Gor, Meet; Soni, Harsh; Wankhede, Vishal Materials, Vol. 14, Issue 21 https://doi.org/10.3390/ma14216527	journal	October 2021
The Combined Effect of Chemical and Structural Factors on Pitting Corrosion Induced by MnS-(Cr, Mn, Al)O Duplex Inclusions Man, Cheng; Dong, Chaofang; Xiao, Kui Corrosion, Vol. 74, Issue 3 https://doi.org/10.5006/2581	journal	October 2017
Corrosion of Additively Manufactured Stainless Steels—Process, Structure, Performance: A Review Schindelholz, Eric J.; Melia, Michael A.; Rodelas, Jeffrey M. Corrosion, Vol. 77, Issue 5 https://doi.org/10.5006/3741	journal	February 2021

Similar Records

Atmospheric Corrosion Of Laser Powder Bed Fusion 316L Stainless Steel.

Conference · Mon Jan 31 23:00:00 EST 2022 · OSTI ID:2001828

How part surfaces influence corrosion for a laser powder bed fusion 316L stainless steel.

Conference · Mon Jan 31 23:00:00 EST 2022 · OSTI ID:2001829

Porosity, roughness, and passive film morphology influence the corrosion behavior of 316L stainless steel manufactured by laser powder bed fusion

Citation Formats

References (47)

Similar Records

Related Subjects