skip to main content
OSTI.GOV title logo U.S. Department of Energy
Office of Scientific and Technical Information

Title: Effect of chromium on corrosion resistance of Ni-Cr-Mo-Gd alloys in seawater

Journal Article · · Journal of Nuclear Materials

Neutron absorbing materials are being considered within commercial spent nuclear fuel disposal canisters to maintain nuclear subcriticality. To select candidate alloys for the canisters, both neutron absorption and corrosion resistance must be considered for this application. This work examines corrosion resistance of Ni-Cr-Mo-Gd alloys developed specifically for neutron absorption. The addition of Gd results in a secondary gadolinide phase (Ni5Gd) that significantly changes the corrosion properties. Testing was performed primarily in seawater at 30 °C. Seawater was selected as the most prevalent terrestrial brine and is characterized by a high chloride concentration. Various electrochemical corrosion techniques were carried out to evaluate Ni-Cr-Mo-Gd alloys with different Cr compositions and investigate the role of Ni5Gd phase on corrosion behavior. C22 was included as a benchmark material, due to the similarity in composition and the significant corrosion data available. Test results showed a tendency to passivate over time which is attributed primarily to dissolution of surface exposed Ni5Gd phase particles leaving primary phase exposed. Cross-sectional analysis indicated that dissolution could penetrate up to hundreds of micrometers deep under aggressive conditions. It was found that higher Cr variant (21.01%) showed much shallower impact, suggesting Cr prevented primary phase corrosion and thus reduced deeper Ni5Gd phase dissolution. Acid pickling of the specimens showed much less dissolution for the higher Cr material and suggested some primary phase dissolution for the low Cr specimen. Acid pickled specimens showed positive shifts in the repassivation potential, suggesting increased surface passivation.

Research Organization:
Idaho National Laboratory (INL), Idaho Falls, ID (United States); Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)
Sponsoring Organization:
USDOE Office of Nuclear Energy (NE)
Grant/Contract Number:
AC07-05ID14517; AC05-00OR22725
OSTI ID:
1988111
Alternate ID(s):
OSTI ID: 1994664
Report Number(s):
INL/JOU-23-71796-Revision-0; TRN: US2403827
Journal Information:
Journal of Nuclear Materials, Vol. 584; ISSN 0022-3115
Publisher:
ElsevierCopyright Statement
Country of Publication:
United States
Language:
English

References (19)

Localized Corrosion: Passive Film Breakdown vs. Pit Growth Stability: Part III. A Unifying Set of Principal Parameters and Criteria for Pit Stabilization and Salt Film Formation journal January 2018
The influence of chromium and molybdenum on the repassivation of nickel-chromium-molybdenum alloys in saline solutions: Influence of Cr and Mo on the Repassivation of Ni-Cr-Mo Alloys journal July 2017
Crevice corrosion testing methods for measuring repassivation potential of alloy 22 journal April 2011
Nickel-based Gadolinium Alloy for Neutron Adsorption Application in Ram Packages journal April 2005
Localized corrosion and stress corrosion cracking of stainless steels in halides other than chlorides solutions: a review journal February 2020
Studies of the Corrosion Properties of Ni-Cr-Mo-Gd Neutron-Absorbing Alloys journal July 2005
Assessing the Corrosion Performance of High-Level Nuclear Waste Containers journal August 2006
Revisiting the effects of molybdenum and tungsten alloying on corrosion behavior of nickel-chromium alloys in aqueous corrosion journal June 2019
Accelerated Testing of Neutron-Absorbing Alloys for Nuclear Criticality Control journal October 2011
An experimental study of crevice corrosion behaviour of 316L stainless steel in artificial seawater journal October 2010
Cr, Mo and W alloying additions in Ni and their effect on passivity journal July 2004
Localized Corrosion: Passive Film Breakdown vs Pit Growth Stability: Part II. A Model for Critical Pitting Temperature journal January 2018
Corrosion resistance of thermally sprayed high-boron iron-based amorphous-metal coatings: Fe 49.7 Cr 17.7 Mn 1.9 Mo 7.4 W 1.6 B 15.2 C 3.8 Si 2.4 journal August 2007
Development and Testing of an Advanced Neutron-Absorbing Gadolinium Alloy for Spent Nuclear Fuel Storage journal August 2006
Effects of Temperature and Potential on the Passive Corrosion Properties of Alloys C22 and C276 journal January 2003
Corrosion behavior of (Fe,Ni)–Gd intermetallic compounds in FeNi-based neutron-absorbing steels journal May 2023
The open-circuit ennoblement of alloy C-22 and other Ni-Cr-Mo alloys journal January 2005
The role of molybdenum additions to austenitic stainless steels in the inhibition of pitting in acid chloride solutions journal January 1977
Study of microstructure and corrosion resistance of FeCrAl-Gd alloys journal March 2023