Parametric evaluation of ducted fuel injection in an optically accessible mixing-controlled compression-ignition engine with two- and four-duct assemblies

Journal Article · Mon Apr 24 00:00:00 EDT 2023 · International Journal of Engine Research

DOI:https://doi.org/10.1177/14680874231170653· OSTI ID:1971426

Yraguen, Boni Frances ^[1]; Steinberg, Adam Michael ^[1]; Nilsen, Christopher William ^[2]; Wengrove, Drummond Edward ^[2]; Mueller, Charles Jeffery ^[2]

---

1. Georgia Institute of Technology, Atlanta, GA, USA
2. Sandia National Laboratories, Livermore, CA, USA

Ducted fuel injection (DFI) is a strategy to improve fuel/charge-gas mixing in direct-injection compression-ignition engines. DFI involves injecting fuel along the axis of a small tube in the combustion chamber, which promotes the formation of locally leaner mixtures in the autoignition zone relative to conventional diesel combustion. Previous work has demonstrated that DFI is effective at curtailing engine-out soot emissions across a wide range of operating conditions. This study extends previous investigations, presenting engine-out emissions and efficiency trends between ducted two-orifice and ducted four-orifice injector tip configurations. For each configuration, parameters investigated include injection pressure, injection duration, intake manifold pressure, intake manifold temperature, start of combustion timing, and intake-oxygen mole fraction. For both configurations and across all parameters, DFI reduced engine-out soot emissions compared to conventional diesel combustion, with little effect on other emissions and engine efficiency. Emissions trends for both configurations were qualitatively the same across the parameters investigated. The four-duct configuration had higher thermal efficiency and indicated-specific engine-out nitrogen oxide emissions but lower indicated-specific engine-out hydrocarbon and carbon monoxide emissions than the two-duct assembly. Both configurations achieved indicated-specific engine-out emissions for both soot and nitrogen oxides that comply with current on- and off-road heavy-duty regulations in the United States without exhaust-gas aftertreatment at an intake-oxygen mole fraction of 12%. High-speed in-cylinder imaging of natural soot luminosity shows that some conditions include a second soot-production phase late in the cycle. The probability of these late-cycle events is sensitive to both the number of ducted sprays and the operating conditions.

• Sponsoring Organization: USDOE
• OSTI ID: 1971426
• Alternate ID(s): OSTI ID: 2003925
• Journal Information: International Journal of Engine Research, Journal Name: International Journal of Engine Research Journal Issue: 2 Vol. 25; ISSN 1468-0874
• Publisher: SAGE Publications
• Country of Publication: United Kingdom
• Language: English