Feedstock-agnostic reductive catalytic fractionation in alcohol and alcohol–water mixtures
[1];
[1];
[1];
[5];
[1]
- Renewable Resources and Enabling Sciences Center, National Renewable Energy, Laboratory, Golden, CO 80401, USA
- Renewable Resources and Enabling Sciences Center, National Renewable Energy, Laboratory, Golden, CO 80401, USA, Department of Chemical and Biological Engineering, University of Colorado Boulder, Boulder, CO 80303, USA
- Office of Clean Energy Demonstrations, U.S. Department of Energy, Washington, DC 20585, USA, ExxonMobil Research and Engineering, Clinton, NJ 08809, USA
- ExxonMobil Chemical Company, Baytown, TX 77520, USA
- Department of Chemical Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA
- ExxonMobil Research and Engineering, Clinton, NJ 08809, USA
Many biomass conversion technologies focus primarily on tailor-made processing conditions for a single feedstock, in contrast to developing a practical operational window for effective processing of a broad variety of lignocellulosic biomass substrates available year-round. Here, we demonstrate the feedstock flexibility of reductive catalytic fractionation (RCF), performed in both batch and flow-through (FT) modes, to effectively process a range of biomass types (hardwoods, softwoods, and herbaceous monocots), regardless of their macromolecular composition and morphological structure differences. Both batch and FT-RCF performed with pure methanol as a solvent allow delignification (or lignin oil yield) values and lignin monomer yields greater than 65 wt% and 25 wt%, respectively, and high retention of carbohydrates (>90%) from herbaceous monocots (corn stover and switchgrass) and hardwood (poplar) biomass substrates, despite the inherent differences between woody and herbaceous biomass feedstocks. FT-RCF of pine (softwood) exhibited lower lignin extraction efficiency (<40%), but the high content of lignin in pine enabled a similar lignin oil yield on a biomass basis relative to other feedstocks. FT-RCF was subsequently tested by adding water as a co-solvent (i.e., 50:50 w/w methanol/water), and delignification values increased to greater than 78% regardless of the feedstock. Together with the comparable delignification values, similar lignin oil and carbohydrate yields, as well as lignin oil properties, were observed across the tested feedstocks, suggesting that RCF with an alcohol/water mixture can effectively and consistently handle a wide range of lignocellulosic biomasses, including hardwoods, softwood, and herbaceous biomasses.
- Research Organization:
- National Renewable Energy Lab. (NREL), Golden, CO (United States)
- Sponsoring Organization:
- USDOE; USDOE Office of Energy Efficiency and Renewable Energy (EERE), Office of Sustainable Transportation. Bioenergy Technologies Office (BETO); ExxonMobil
- Grant/Contract Number:
- AC36-08GO28308
- OSTI ID:
- 1970797
- Alternate ID(s):
- OSTI ID: 1971875
- Report Number(s):
- NREL/JA-2A00-84893; GRCHFJ
- Journal Information:
- Green Chemistry, Journal Name: Green Chemistry Vol. 25 Journal Issue: 9; ISSN 1463-9262
- Publisher:
- Royal Society of Chemistry (RSC)Copyright Statement
- Country of Publication:
- United Kingdom
- Language:
- English
Similar Records
Techno-economic analysis and life cycle assessment of a biorefinery utilizing reductive catalytic fractionation
Multi-pass flow-through reductive catalytic fractionation