Manufacturing of reliable actively cooled fusion components - a challenge for non-destructive inspections
- Metallwerk Plansee, Reutte (Austria); and others
Actively cooled in-vessel components like divertors or limiters require high quality and reliability to ensure safe operation during long term use. Such components are subjected to very severe thermal and mechanical cyclic loads and high power densities. Key requirements for materials in question are e.g. high melting point and thermal conductivity and low atomic mass number. Since no single material can simultaneously meet all of these requirements the selection of materials to be combined in composite components as well as of manufacturing and non-destructive inspection (NDI) methods is a particularly challenging task. Armour materials like graphite intended to face the plasma and help to maintain its desired properties, are bonded to metallic substrates like copper, molybdenum or stainless steel providing cooling and mechanical support. Several techniques such as brazing and active metal casting have been developed and successfully applied for joining materials with different thermophysical properties, pursuing the objective of sufficient heat dissipation from the hot, plasma facing surface to the coolant. NDI methods are an integral part of the manufacturing schedule of these components, starting in the design phase and ending in the final inspection. They apply all kinds of divertor types (monobloc and flat-tile concept). Particular focus is put on the feasibility of detecting small flaws and defects in complex interfaces and on the limits of these techniques. Special test pieces with defined defects acting as standards were inspected. Accompanying metallographic investigations were carried out to compare actual defects with results recorded during NDI.
- OSTI ID:
- 196982
- Report Number(s):
- CONF-940664-; TRN: 95:005767-0151
- Resource Relation:
- Conference: ISFNT-3: international symposium on fusion nuclear technology, Los Angeles, CA (United States), 27 Jun - 1 Jul 1994; Other Information: PBD: 1994; Related Information: Is Part Of Third international symposium on fusion nuclear technology; PB: 362 p.
- Country of Publication:
- United States
- Language:
- English
Similar Records
An evaluation of brazes for plasma facing component applications from a waste disposal perspective
Recent results of high heat flux testing at the Plasma Materials Test Facility