Microstructure and deformation mechanism of Si-strengthened intercritically annealed quenching and partitioning steels

Gao, Pengfei; Li, Feng; An, Ke; Zhao, Zhengzhi; Chu, Xiaohong; Cui, Heng

doi:10.1016/j.matchar.2022.112145

Microstructure and deformation mechanism of Si-strengthened intercritically annealed quenching and partitioning steels

Journal Article · Thu Sep 01 00:00:00 EDT 2022 · Materials Characterization

DOI:https://doi.org/10.1016/j.matchar.2022.112145· OSTI ID:1961432

Gao, Pengfei; Li, Feng; An, Ke; Zhao, Zhengzhi; Chu, Xiaohong; Cui, Heng

Not Available

View Accepted Manuscript (Publisher)

Sponsoring Organization:: USDOE

OSTI ID:: 1961432

Journal Information:: Materials Characterization, Journal Name: Materials Characterization Journal Issue: C Vol. 191; ISSN 1044-5803

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (50)

Effects of partitioning parameters in quenching and partitioning on microstructure and mechanical properties of an ultra-high strength low-alloy steel Jafari, R.; Kheirandish, S.; Mirdamadi, S. Materialwissenschaft und Werkstofftechnik, Vol. 49, Issue 11 https://doi.org/10.1002/mawe.201700267	journal	October 2018
Proof strength values for austenitic stainless steels at elevated temperatures Eliasson, Johan; Sandström, Rolf Steel Research, Vol. 71, Issue 6-7 https://doi.org/10.1002/srin.200001224	journal	June 2000
Effect of morphology of second-phase martensite on tensile properties of Fe-0.1C dual phase steels Tomita, Yoshiyuki Journal of Materials Science, Vol. 25, Issue 12 https://doi.org/10.1007/BF00580148	journal	December 1990
Deformation characteristics of dual-phase steels Marder, A. R. Metallurgical Transactions A, Vol. 13, Issue 1 https://doi.org/10.1007/BF02642418	journal	January 1982
Influence of martensite composition and content on the properties of dual phase steels Davies, R. G. Metallurgical Transactions A, Vol. 9, Issue 5 https://doi.org/10.1007/BF02659924	journal	May 1978
Kinetics of strain-induced martensitic nucleation Olson, G. B.; Cohen, Morris Metallurgical Transactions A, Vol. 6, Issue 4 https://doi.org/10.1007/BF02672301	journal	April 1975
Effect of Al on martensite tempering: comparison with Si Zhu, Kangying; Shi, Hui; Chen, Hao Journal of Materials Science, Vol. 53, Issue 9 https://doi.org/10.1007/s10853-018-2037-6	journal	January 2018
On the influence of interactions between phases on the mechanical stability of retained austenite in transformation-induced plasticity multiphase steels Jacques, P. J.; Delannay, F.; Ladrière, J. Metallurgical and Materials Transactions A, Vol. 32, Issue 11 https://doi.org/10.1007/s11661-001-1027-4	journal	November 2001
First In Situ Lattice Strains Measurements Under Load at VULCAN An, Ke; Skorpenske, Harley D.; Stoica, Alexandru D. Metallurgical and Materials Transactions A, Vol. 42, Issue 1 https://doi.org/10.1007/s11661-010-0495-9	journal	October 2010
Benefits of Intercritical Annealing in Quenching and Partitioning Steel Wang, X.; Liu, L.; Liu, R. D. Metallurgical and Materials Transactions A, Vol. 49, Issue 5 https://doi.org/10.1007/s11661-018-4559-6	journal	March 2018
Influence of martensite content and morphology on tensile and impact properties of high-martensite dual-phase steels Bag, A.; Ray, K. K.; Dwarakadasa, E. S. Metallurgical and Materials Transactions A, Vol. 30, Issue 5 https://doi.org/10.1007/s11661-999-0269-4	journal	May 1999
Influence of grain size and stacking-fault energy on deformation twinning in fcc metals El-Danaf, Ehab; Kalidindi, Surya R.; Doherty, Roger D. Metallurgical and Materials Transactions A, Vol. 30, Issue 5 https://doi.org/10.1007/s11661-999-0272-9	journal	May 1999
Real-Time In Situ Neutron Diffraction Investigation of Phase-Specific Load Sharing in a Cold-Rolled TRIP Sheet Steel Yu, Dunji; Huang, Lu; Chen, Yan JOM, Vol. 70, Issue 8 https://doi.org/10.1007/s11837-018-2947-4	journal	May 2018
Nanoscale Solute Partitioning and Carbide Precipitation in a Multiphase TRIP Steel Analyzed by Atom Probe Tomography Devaraj, Arun; Xu, Zeren; Abu-Farha, Fadi JOM, Vol. 70, Issue 9 https://doi.org/10.1007/s11837-018-2974-1	journal	June 2018
Effects of aluminum on the microstructure and phase transformation of TRIP steels Lim, NamSuk; Park, HyungSeok; Kim, SungIl Metals and Materials International, Vol. 18, Issue 4 https://doi.org/10.1007/s12540-012-4012-0	journal	August 2012
Quasi-Situ Characterization of Deformation in Low-Carbon Steel with Equiaxed and Lamellar Microstructure Treated by the Quenching and Partitioning Process Gao, Pengfei; Chen, Weijian; Li, Feng Acta Metallurgica Sinica (English Letters), Vol. 33, Issue 12 https://doi.org/10.1007/s40195-020-01135-8	journal	September 2020
The effect of ferrite grain size and martensite volume fraction on the tensile properties of dual phase steel Peng-Heng, Chang; Preban, A. G. Acta Metallurgica, Vol. 33, Issue 5 https://doi.org/10.1016/0001-6160(85)90114-2	journal	May 1985
A mechanism for the strain-induced nucleation of martensitic transformations Olson, G. B.; Cohen, Morris Journal of the Less Common Metals, Vol. 28, Issue 1 https://doi.org/10.1016/0022-5088(72)90173-7	journal	July 1972
Carbon partitioning into austenite after martensite transformation Speer, J.; Matlock, D. K.; De Cooman, B. C. Acta Materialia, Vol. 51, Issue 9 https://doi.org/10.1016/S1359-6454(03)00059-4	journal	May 2003
Comparison of the effects of silicon and aluminium on the tensile behaviour of multiphase TRIP-assisted steels Girault, Etienne; Mertens, Anne; Jacques, Pascal Scripta Materialia, Vol. 44, Issue 6 https://doi.org/10.1016/S1359-6462(00)00697-7	journal	April 2001
Thermal stability of retained austenite in TRIP steels studied by synchrotron X-ray diffraction during cooling Vandijk, N.; Butt, A.; Zhao, L. Acta Materialia, Vol. 53, Issue 20 https://doi.org/10.1016/j.actamat.2005.08.017	journal	December 2005
Characterization of individual retained austenite grains and their stability in low-alloyed TRIP steels Jimenez-Melero, E.; van Dijk, N. H.; Zhao, L. Acta Materialia, Vol. 55, Issue 20 https://doi.org/10.1016/j.actamat.2007.08.040	journal	December 2007
In situ neutron diffraction investigation of the collaborative deformation–transformation mechanism in TRIP-assisted steels at room and elevated temperatures Muránsky, O.; Šittner, P.; Zrník, J. Acta Materialia, Vol. 56, Issue 14 https://doi.org/10.1016/j.actamat.2008.03.026	journal	August 2008
High-energy X-ray diffraction study on the temperature-dependent mechanical stability of retained austenite in low-alloyed TRIP steels Blondé, R.; Jimenez-Melero, E.; Zhao, L. Acta Materialia, Vol. 60, Issue 2 https://doi.org/10.1016/j.actamat.2011.10.019	journal	January 2012
Stress–strain relationship between ferrite and martensite in a dual-phase steel studied by in situ neutron diffraction and crystal plasticity theories Woo, W.; Em, V. T.; Kim, E. -Y. Acta Materialia, Vol. 60, Issue 20 https://doi.org/10.1016/j.actamat.2012.08.054	journal	December 2012
Micromechanical behavior of TRIP-assisted multiphase steels studied with in situ high-energy X-ray diffraction Fu, B.; Yang, W. Y.; Wang, Y. D. Acta Materialia, Vol. 76 https://doi.org/10.1016/j.actamat.2014.05.029	journal	September 2014
Austenite stability and deformation behavior in a cold-rolled transformation-induced plasticity steel with medium manganese content Cai, Z. H.; Ding, H.; Misra, R. D. K. Acta Materialia, Vol. 84 https://doi.org/10.1016/j.actamat.2014.10.052	journal	February 2015
Thermal expansion of a Spheroidal Graphite Iron: A micromechanical approach Rodriguez, F. J.; Boccardo, A. D.; Dardati, P. M. Finite Elements in Analysis and Design, Vol. 141 https://doi.org/10.1016/j.finel.2017.11.012	journal	March 2018
Competitive mechanisms occurring during quenching and partitioning of three silicon variants of 0.4 wt.% carbon steels Miettunen, Ilkka; Ghosh, Sumit; Somani, Mahesh C. Journal of Materials Research and Technology, Vol. 11 https://doi.org/10.1016/j.jmrt.2021.01.085	journal	March 2021
Effect of substitution of Si by Al on the microstructure and mechanical properties of bainitic transformation-induced plasticity steels Zhu, Kangying; Mager, Coralie; Huang, Mingxin Journal of Materials Science & Technology, Vol. 33, Issue 12 https://doi.org/10.1016/j.jmst.2017.09.002	journal	December 2017
New crystallography insights of retained austenite transformation in an intercritical annealed quenching and partitioning steel Gao, Pengfei; Chen, Weijian; Li, Feng Materials Letters, Vol. 273 https://doi.org/10.1016/j.matlet.2020.127955	journal	August 2020
Effect of ferrite volume fraction on work hardening behavior of high bainite dual phase (DP) steels Akbarpour, Mohammad Reza; Ekrami, A. Materials Science and Engineering: A, Vol. 477, Issue 1-2 https://doi.org/10.1016/j.msea.2007.05.051	journal	March 2008
Microstructure–hardness relationship in quenched and partitioned medium-carbon and high-carbon steels containing silicon Nayak, S. S.; Anumolu, R.; Misra, R. D. K. Materials Science and Engineering: A, Vol. 498, Issue 1-2 https://doi.org/10.1016/j.msea.2008.08.028	journal	December 2008
Local plastic strain evolution in a high strength dual-phase steel Ghadbeigi, H.; Pinna, C.; Celotto, S. Materials Science and Engineering: A, Vol. 527, Issue 18-19 https://doi.org/10.1016/j.msea.2010.04.052	journal	July 2010
Factors influencing the austenite stability during tensile testing of Quenching and Partitioning steel determined via in-situ Electron Backscatter Diffraction De Knijf, Dorien; Föjer, Cecilia; Kestens, Leo A. I. Materials Science and Engineering: A, Vol. 638 https://doi.org/10.1016/j.msea.2015.04.075	journal	June 2015
Impact of intercritical annealing temperature and strain state on mechanical stability of retained austenite in medium Mn steel Yang, Yong-Gang; Mi, Zhen-Li; Xu, Mei Materials Science and Engineering: A, Vol. 725 https://doi.org/10.1016/j.msea.2018.04.041	journal	May 2018
Correlation between mechanical stability and hardness of austenite in martensite/austenite mixtures Mola, Javad; Seo, Eun Jung; Cho, Lawrence Materials Science and Engineering: A, Vol. 822 https://doi.org/10.1016/j.msea.2021.141687	journal	August 2021
Lean duplex TRIP steel: Role of ferrite in the texture development, plastic anisotropy, martensitic transformation kinetics, and stress partitioning Hou, Peijun; Li, Yuan; Chae, Dongchul Materialia, Vol. 15 https://doi.org/10.1016/j.mtla.2020.100952	journal	March 2021
Influence of partial replacement of Si by Al on the change of phase fraction during heat treatment of TRIP steels Suh, Dong-Woo; Park, Seong-Jun; Oh, Chang-Seok Scripta Materialia, Vol. 57, Issue 12 https://doi.org/10.1016/j.scriptamat.2007.08.022	journal	December 2007
Microstructural banding effects clarified through micrographic digital image correlation Tasan, C. C.; Hoefnagels, J. P. M.; Geers, M. G. D. Scripta Materialia, Vol. 62, Issue 11 https://doi.org/10.1016/j.scriptamat.2010.02.014	journal	June 2010
Near-Ac3 austenitized ultra-fine-grained quenching and partitioning (Q&P) steel Cho, Lawrence; Seo, Eun Jung; De Cooman, Bruno C. Scripta Materialia, Vol. 123 https://doi.org/10.1016/j.scriptamat.2016.06.003	journal	October 2016
Optimum properties of quenching and partitioning steels achieved by balancing fraction and stability of retained austenite Liu, L.; He, B. B.; Cheng, G. J. Scripta Materialia, Vol. 150 https://doi.org/10.1016/j.scriptamat.2018.02.035	journal	June 2018
Ductile and intergranular brittle fracture in a two-step quenching and partitioning steel Xiong, Zhiping; Jacques, Pascal J.; Perlade, Astrid Scripta Materialia, Vol. 157 https://doi.org/10.1016/j.scriptamat.2018.07.030	journal	December 2018
The Deformation and Ageing of Mild Steel: III Discussion of Results Hall, E. O. Proceedings of the Physical Society. Section B, Vol. 64, Issue 9 https://doi.org/10.1088/0370-1301/64/9/303	journal	September 1951
Critical Assessment 7: Quenching and partitioning Speer, J. G.; De Moor, E.; Clarke, A. J. Materials Science and Technology, Vol. 31, Issue 1 https://doi.org/10.1179/1743284714Y.0000000628	journal	August 2014
VULCAN: A “hammer” for high-temperature materials research An, Ke; Chen, Yan; Stoica, Alexandru D. MRS Bulletin, Vol. 44, Issue 11 https://doi.org/10.1557/mrs.2019.256	journal	November 2019
Effects of Silicon and Manganese Addition on Mechanical Properties of High-strength Hot-rolled Sheet Steel Containing Retained Austenite. Tsukatani, Ichiro; Hashimoto, Shun'ichi; Inoue, Tsuyoshi ISIJ International, Vol. 31, Issue 9 https://doi.org/10.2355/isijinternational.31.992	journal	January 1991
The Developments of Cold-rolled TRIP-assisted Multiphase Steels. Al-alloyed TRIP-assisted Multiphase Steels. Jacques, P. J.; Girault, E.; Mertens, A. ISIJ International, Vol. 41, Issue 9 https://doi.org/10.2355/isijinternational.41.1068	journal	January 2001
Design of Structure, Composition and Heat Treatment Process for High Strength Steel Hsu, T. Y.; Xu, Zu Yao Materials Science Forum, Vol. 561-565 https://doi.org/10.4028/www.scientific.net/MSF.561-565.2283	journal	October 2007
Static and Impact-Dynamic Characterization of Multiphase TRIP Steels Van Slycken, Joost; Bouquerel, Jérémie; Verleysen, Patricia Materials Science Forum, Vol. 638-642 https://doi.org/10.4028/www.scientific.net/MSF.638-642.3585	journal	January 2010

Similar Records

Microstructure and Mechanical Properties of Intercritically Treated Grade 91 Steel

Journal Article · Thu Sep 10 00:00:00 EDT 2020 · Materials · OSTI ID:1659354

Microstructural analysis of martensite constituents in quenching and partitioning steels

Journal Article · Sun Jun 01 00:00:00 EDT 2014 · Materials Characterization · OSTI ID:22340369

Microstructure and deformation mechanism of Si-strengthened intercritically annealed quenching and partitioning steels

Citation Formats

References (50)

Similar Records

Related Subjects