Effects of Eta Phase on Creep Performance of the Nickel-Base Superalloy 263
Conference
·
OSTI ID:1957982
- Michigan Technological University
In wrought nickel-base alloys used at elevated temperatures for extended periods of time, it is commonly observed that unwanted phases may nucleate and grow. One such phase is the eta phase, based on Ni3Ti, which is a plate-shaped precipitate that nucleates at the grain boundaries and grows at the expense of the strengthening gamma prime phase. In order to study the effects of eta phase on creep performance, Alloy 263 was modified to contain 3 different microstructures: standard (contains gamma prime); aged (contains gamma prime and eta); and modified (contains only eta and no gamma prime). These microstructures were then creep tested in the range of 973-1123 K (700-850°C). An extensive test matrix revealed that the eta-only modified alloy had creep rupture strengths within 10% of the standard alloy even though this alloy had no strengthening gamma prime precipitates. It also exhibited superior creep ductility. A preliminary test matrix on the aged material containing eta and gamma prime prior to the creep tests revealed that the performance of this microstructure was generally between that of the standard alloy (best) and the eta-only alloy (worst). The aged material exhibited far superior creep ductility. These results suggest that the presence of the eta phase may not be deleterious to creep ductility, and in fact, may enhance it.
- Research Organization:
- Michigan Technological University
- Sponsoring Organization:
- USDOE Office of Fossil Energy and Carbon Management (FECM)
- DOE Contract Number:
- FE0027822
- OSTI ID:
- 1957982
- Report Number(s):
- EPRI Report Number 3002017150
- Country of Publication:
- United States
- Language:
- English
Similar Records
Design, Creep Performance and Deformation Behavior of an Eta-Phase Strengthened Nickel-Base Alloy for A-USC Power Plant Applications
Precipitate Phase Stability and Mechanical Properties of Alloy 263 and Variants in Wrought or Cast Form
Effect of FTMT on precipitation and mechanical properties of aluminum-lithium based alloys
Conference
·
Sat Oct 01 00:00:00 EDT 2016
·
OSTI ID:1958002
Precipitate Phase Stability and Mechanical Properties of Alloy 263 and Variants in Wrought or Cast Form
Conference
·
Mon Sep 06 00:00:00 EDT 2021
·
OSTI ID:1819421
Effect of FTMT on precipitation and mechanical properties of aluminum-lithium based alloys
Conference
·
· TMS (The Metallurgical Society) Paper Selection; (USA)
·
OSTI ID:5450883