Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Validation of the generic TRUEX model using data from TRUEX demonstrations with actual high-level waste

Conference ·
OSTI ID:192425

The main objective of the Generic TRUEX Model (GTM) is to calculate TRUEX solvent extraction flowsheets based on input of a specific feed and a specific set of process goals and constraints. The output will be (1) the compositions of all effluent streams, (2) the compositions of both phases (organic and aqueous) in each stage of the contacting equipment at steady state, and (3) estimates of the space and cost requirements for installing the flowsheet in a plant situation. Other options are available to calculate aqueous-phase speciation and thermodynamic activities, distribution ratios of extractable species, and solvent radiolytic and hydrolytic degradation. Calculation of these options is based on initial aqueous- and organic-phase compositions and other important variables supplied by the user. Three demonstrations of the TRUEX process have been run by Power Reactor and Nuclear Fuel Development Corp. (PNC) researchers at the Tokai Works using actual PUREX raffinates. A 19-stage mixer settler was used for the extraction and scrub sections, and a 16-to-19-stage unit for stripping. Stagewise data were collected on the behavior of nitric acid and several fission-product and actinide radioisotopes during these runs; Run 2 was the best documented and the one with which most comparisons were made. These data are important tools for validating predictions made by the GTM and understanding the intricacies of the TRUEX process. In this paper, results of the GTM calculations will be compared to the actual data published by PNC researchers. Differences between model predictions and experimental data were analyzed in terms of the process chemistry and demonstration conditions.

Research Organization:
Argonne National Lab., IL (United States)
Sponsoring Organization:
USDOE, Washington, DC (United States)
DOE Contract Number:
W-31109-ENG-38
OSTI ID:
192425
Report Number(s):
ANL/CMT/CP--84527; CONF-950917--20; ON: DE96005207
Country of Publication:
United States
Language:
English