High-performance LiNi0.8Mn0.1Co0.1O2 cathode by nanoscale lithium sulfide coating via atomic layer deposition

Wang, Xin; Cai, Jiyu; Ren, Yang; Benamara, Mourad; Zhou, Xinwei; Li, Yan; Chen, Zonghai; Zhou, Hua; Xiao, Xianghui; Liu, Yuzi; Meng, Xiangbo

doi:10.1016/j.jechem.2022.02.015

High-performance LiNi_0.8Mn_0.1Co_0.1O₂ cathode by nanoscale lithium sulfide coating via atomic layer deposition

Journal Article · Sat Feb 19 00:00:00 EST 2022 · Journal of Energy Chemistry

DOI:https://doi.org/10.1016/j.jechem.2022.02.015· OSTI ID:1889160

Wang, Xin ^[1]; Cai, Jiyu ^[2]; Ren, Yang ^[3]; Benamara, Mourad ^[1]; Zhou, Xinwei ^[4]; Li, Yan ^[5]; Chen, Zonghai ^[6]; Zhou, Hua ^[3]; Xiao, Xianghui ^[7]; Liu, Yuzi ^[4]; Meng, Xiangbo ^[1]

Univ. of Arkansas, Fayetteville, AR (United States)
Univ. of Arkansas, Fayetteville, AR (United States); Argonne National Lab. (ANL), Lemont, IL (United States). Chemical Sciences and Engineering Division
Argonne National Lab. (ANL), Lemont, IL (United States). Advanced Photon Source (APS)
Argonne National Lab. (ANL), Lemont, IL (United States). Center for Nanoscale Materials
Chinese Academy of Sciences (CAS), Beijing (China); Univ. of Chinese Academy of Sciences, Beijing (China)
Argonne National Lab. (ANL), Lemont, IL (United States). Chemical Sciences and Engineering Division
Brookhaven National Lab. (BNL), Upton, NY (United States). National Synchrotron Light Source II (NSLS-II)

The commercialization of nickel-rich LiNi_0.8Mn_0.1Co_0.1O₂ (NMC811) has been hindered by its continuous loss of practical capacity and reduction in average working voltage. To address these issues, surface modification has been well-recognized as an effective strategy. Different from the coatings reported in literature to date, in this work, we for the first time report a sulfide coating, amorphous Li₂S via atomic layer deposition (ALD). Here, our study revealed that the conformal nano-Li₂S coating shows exceptional protection over the NMC811 cathodes, accounting for the dramatically boosted capacity retention from ~11.6% to ~71% and the evidently mitigated voltage reduction from 0.39 to 0.18 V after 500 charge–discharge cycles. In addition, the Li₂S coating remarkably improved the rate capability of the NMC811 cathode. Our investigation further revealed that all these beneficial effects of the ALD-deposited nano-Li₂S coating lie in the following aspects: (i) maintain the mechanical integrity of the NMC811 electrode; (ii) stabilize the NMC electrode/electrolyte interface; and (iii) suppress the irreversible phase transition of NMC structure. Particularly, this study also has revealed that the nano-Li₂S coating has played some unique role not associated with traditional non-sulfide coatings such as oxides. In this regard, we disclosed that the Li₂S layer has reacted with the released O₂ from the NMC lattices, and thereby has dramatically mitigated electrolyte oxidation and electrode corrosion. Thus, this study is significant and has demonstrated that sulfides may be an important class of coating materials to tackle the issues of NMCs and other layered cathodes in lithium batteries.

View Accepted Manuscript (DOE)

Research Organization:: Brookhaven National Laboratory (BNL), Upton, NY (United States)

Sponsoring Organization:: National Science Foundation Grant (NSF); USDOE Office of Energy Efficiency and Renewable Energy (EERE), Transportation Office. Vehicle Technologies Office; USDOE Office of Science (SC), Basic Energy Sciences (BES)

Grant/Contract Number:: AC02-06CH11357; SC0012704

OSTI ID:: 1889160

Report Number(s):: BNL-223469-2022-JAAM

Journal Information:: Journal of Energy Chemistry, Journal Name: Journal of Energy Chemistry Vol. 69; ISSN 2095-4956

Publisher:: ElsevierCopyright Statement

Country of Publication:: United States

Language:: English

References (76)

A Facile Way to Construct Stable and Ionic Conductive Lithium Sulfide Nanoparticles Composed Solid Electrolyte Interphase on Li Metal Anode Cui, Yongliang; Liu, Sufu; Wang, Donghuang Advanced Functional Materials, Vol. 31, Issue 3 https://doi.org/10.1002/adfm.202006380	journal	October 2020
Ultrathin Direct Atomic Layer Deposition on Composite Electrodes for Highly Durable and Safe Li-Ion Batteries Jung, Yoon Seok; Cavanagh, Andrew S.; Riley, Leah A. Advanced Materials, Vol. 22, Issue 19 https://doi.org/10.1002/adma.200903951	journal	April 2010
Emerging Applications of Atomic Layer Deposition for Lithium-Ion Battery Studies Meng, Xiangbo; Yang, Xiao-Qing; Sun, Xueliang Advanced Materials, Vol. 24, Issue 27 https://doi.org/10.1002/adma.201200397	journal	June 2012
Effect of Electrolyte Additives on the LiNi _0.5 Mn _0.3 Co _0.2 O ₂ Surface Film Formation with Lithium and Graphite Negative Electrodes Hekmatfar, Maral; Hasa, Ivana; Eghbal, Ramtin Advanced Materials Interfaces, Vol. 7, Issue 1 https://doi.org/10.1002/admi.201901500	journal	November 2019
MnPO ₄ -Coated Li(Ni _0.4 Co _0.2 Mn _0.4 )O ₂ for Lithium(-Ion) Batteries with Outstanding Cycling Stability and Enhanced Lithiation Kinetics Chen, Zhen; Kim, Guk-Tae; Bresser, Dominic Advanced Energy Materials, Vol. 8, Issue 27 https://doi.org/10.1002/aenm.201801573	journal	August 2018
Lithium‐Metal Anode Instability of the Superionic Halide Solid Electrolytes and the Implications for Solid‐State Batteries Riegger, Luise M.; Schlem, Roman; Sann, Joachim Angewandte Chemie International Edition, Vol. 60, Issue 12 https://doi.org/10.1002/anie.202015238	journal	February 2021
Enhanced Electrochemical Properties of LiNi _0.8 Co _0.1 Mn _0.1 O ₂ Cathode Materials Modified with Lithium‐Ion Conductive Coating LiNbO ₃ Hu, Guorong; Tao, Yong; Lu, Yan ChemElectroChem, Vol. 6, Issue 18 https://doi.org/10.1002/celc.201901208	journal	September 2019
Tree-Like NiS2/MoS2-RGO Nanocomposites as pH Universal Electrocatalysts for Hydrogen Evolution Reaction Wang, Lina; Guo, Tong; Sun, Sen Catalysis Letters, Vol. 149, Issue 5 https://doi.org/10.1007/s10562-019-02698-7	journal	February 2019
Surface chemistry of LiFePO4 cathode material as unraveled by HRTEM and XPS Zhang, Junwei; Yu, Haoxiang; Zhang, Xikun Ionics, Vol. 27, Issue 1 https://doi.org/10.1007/s11581-020-03814-z	journal	October 2020
High-Index-Faceted Ni3S2 Branch Arrays as Bifunctional Electrocatalysts for Efficient Water Splitting Deng, Shengjue; Zhang, Kaili; Xie, Dong Nano-Micro Letters, Vol. 11, Issue 1 https://doi.org/10.1007/s40820-019-0242-8	journal	February 2019
Ionic conductivity of solid solutions of α-Li2SO4 with Li2WO4: Strong evidence for the paddle wheel mechanism of ion transport Dissanayake, M.; Careem, M.; Bandaranayake, P. Solid State Ionics, Vol. 48, Issue 3-4 https://doi.org/10.1016/0167-2738(91)90043-B	journal	November 1991
Improvement in the electrochemical performance of LiNi0.8Co0.1Mn0.1O2 cathode material by Li2ZrO3 coating Liang, Hongmei; Wang, Zhixing; Guo, Huajun Applied Surface Science, Vol. 423 https://doi.org/10.1016/j.apsusc.2017.06.283	journal	November 2017
Ultrathin ZrO2 on LiNi0.5Mn0.3Co0.2O2 electrode surface via atomic layer deposition for high-voltage operation in lithium-ion batteries Ahn, Jinhyeok; Jang, Eun Kwang; Yoon, Sukeun Applied Surface Science, Vol. 484 https://doi.org/10.1016/j.apsusc.2019.04.123	journal	August 2019
Implantable Solid Electrolyte Interphase in Lithium-Metal Batteries Cheng, Xin-Bing; Yan, Chong; Chen, Xiang Chem, Vol. 2, Issue 2 https://doi.org/10.1016/j.chempr.2017.01.003	journal	February 2017
Uniform Ni-rich LiNi0.6Co0.2Mn0.2O2 Porous Microspheres: Facile Designed Synthesis and Their Improved Electrochemical Performance Zheng, Zhuo; Guo, Xiao-Dong; Chou, Shu-Lei Electrochimica Acta, Vol. 191 https://doi.org/10.1016/j.electacta.2016.01.092	journal	February 2016
Ultrathin Al2O3 Coatings for Improved Cycling Performance and Thermal Stability of LiNi0.5Co0.2Mn0.3O2 Cathode Material Shi, Yang; Zhang, Minghao; Qian, Danna Electrochimica Acta, Vol. 203 https://doi.org/10.1016/j.electacta.2016.03.185	journal	June 2016
Effects of PVP-assisted Co3O4 coating on the electrochemical and storage properties of LiNi0.6Co0.2Mn0.2O2 at high cut-off voltage Tao, Fen; Yan, Xiao-xia; Liu, Jun-Ji Electrochimica Acta, Vol. 210 https://doi.org/10.1016/j.electacta.2016.05.060	journal	August 2016
Using Li2S to Compensate for the Loss of Active Lithium in Li-ion Batteries Zhan, Yuanjie; Yu, Hailong; Ben, Liubin Electrochimica Acta, Vol. 255 https://doi.org/10.1016/j.electacta.2017.09.167	journal	November 2017
Improving cycling performance and rate capability of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode materials by Li4Ti5O12 coating Xu, Ya-Di; Xiang, Wei; Wu, Zhen-Guo Electrochimica Acta, Vol. 268 https://doi.org/10.1016/j.electacta.2018.02.049	journal	April 2018
Cooperating effects of conformal iron oxide (FeOx) ALD coating and post-annealing on Li-Rich layered cathode materials Gao, Yan; Shang, Zeyu; He, Xiaoqing Electrochimica Acta, Vol. 318 https://doi.org/10.1016/j.electacta.2019.06.042	journal	September 2019
Applications of XPS in the characterization of Battery materials Shutthanandan, Vaithiyalingam; Nandasiri, Manjula; Zheng, Jianming Journal of Electron Spectroscopy and Related Phenomena, Vol. 231 https://doi.org/10.1016/j.elspec.2018.05.005	journal	February 2019
Atomic layer deposition of solid-state electrolytes for next-generation lithium-ion batteries and beyond: Opportunities and challenges Meng, Xiangbo Energy Storage Materials, Vol. 30 https://doi.org/10.1016/j.ensm.2020.05.001	journal	September 2020
Lithium sulfide nanocrystals as cathode materials for advanced batteries Wan, Fengming; Fang, Liran; Zhang, Xin Journal of Energy Chemistry, Vol. 63 https://doi.org/10.1016/j.jechem.2021.09.028	journal	December 2021
Enhanced electrochemical performance and thermal properties of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode material via CaF2 coating Dai, Shican; Yan, Guanjie; Wang, Long Journal of Electroanalytical Chemistry, Vol. 847 https://doi.org/10.1016/j.jelechem.2019.113197	journal	August 2019
Atomic-scale tuned interface of nickel-rich cathode for enhanced electrochemical performance in lithium-ion batteries Liu, Yongqiang; Wang, Xin; Cai, Jiyu Journal of Materials Science & Technology, Vol. 54 https://doi.org/10.1016/j.jmst.2020.02.080	journal	October 2020
Behavior of Lithium Metal Anodes under Various Capacity Utilization and High Current Density in Lithium Metal Batteries Jiao, Shuhong; Zheng, Jianming; Li, Qiuyan Joule, Vol. 2, Issue 1 https://doi.org/10.1016/j.joule.2017.10.007	journal	January 2018
Designing In-Situ-Formed Interphases Enables Highly Reversible Cobalt-Free LiNiO2 Cathode for Li-ion and Li-metal Batteries Deng, Tao; Fan, Xiulin; Cao, Longsheng Joule, Vol. 3, Issue 10 https://doi.org/10.1016/j.joule.2019.08.004	journal	October 2019
A study on sulfites for lithium-ion battery electrolytes Yu, Bi Tao; Qiu, Wei Hua; Li, Fu Shen Journal of Power Sources, Vol. 158, Issue 2 https://doi.org/10.1016/j.jpowsour.2005.10.033	journal	August 2006
Minimization of the cation mixing in Li1+x(NMC)1−xO2 as cathode material Zhang, Xiaoyu; Jiang, W. J.; Mauger, A. Journal of Power Sources, Vol. 195, Issue 5 https://doi.org/10.1016/j.jpowsour.2009.09.029	journal	March 2010
Structural transformation of a lithium-rich Li1.2Co0.1Mn0.55Ni0.15O2 cathode during high voltage cycling resolved by in situ X-ray diffraction Mohanty, Debasish; Kalnaus, Sergiy; Meisner, Roberta A. Journal of Power Sources, Vol. 229 https://doi.org/10.1016/j.jpowsour.2012.11.144	journal	May 2013
Li2S-reduced graphene oxide nanocomposites as cathode material for lithium sulfur batteries Han, Kai; Shen, Jingmei; Hayner, Cary M. Journal of Power Sources, Vol. 251 https://doi.org/10.1016/j.jpowsour.2013.11.062	journal	April 2014
An approach to application for LiNi0.6Co0.2Mn0.2O2 cathode material at high cutoff voltage by TiO2 coating Chen, Yanping; Zhang, Yun; Chen, Baojun Journal of Power Sources, Vol. 256 https://doi.org/10.1016/j.jpowsour.2014.01.061	journal	June 2014
A short process for the efficient utilization of transition-metal chlorides in lithium-ion batteries: A case of Ni0.8Co0.1Mn0.1O1.1 and LiNi0.8Co0.1Mn0.1O2 Li, Tao; Li, Xinhai; Wang, Zhixing Journal of Power Sources, Vol. 342 https://doi.org/10.1016/j.jpowsour.2016.12.095	journal	February 2017
Stabilizing interface layer of LiNi0.5Co0.2Mn0.3O2 cathode materials under high voltage using p-toluenesulfonyl isocyanate as film forming additive Dong, Peng; Wang, Ding; Yao, Yao Journal of Power Sources, Vol. 344 https://doi.org/10.1016/j.jpowsour.2017.01.116	journal	March 2017
Comparative studies of zirconium doping and coating on LiNi0.6Co0.2Mn0.2O2 cathode material at elevated temperatures Liu, Siyang; Dang, Zhiyan; Liu, Da Journal of Power Sources, Vol. 396 https://doi.org/10.1016/j.jpowsour.2018.06.052	journal	August 2018
Effect of surface modification using a sulfate-based surfactant on the electrochemical performance of Ni-rich cathode materials Chae, Bum-Jin; Yim, Taeeun Materials Chemistry and Physics, Vol. 214 https://doi.org/10.1016/j.matchemphys.2018.04.078	journal	August 2018
A modified LiF coating process to enhance the electrochemical performance characteristics of LiNi0.8Co0.1Mn0.1O2 cathode materials Xiong, Xunhui; Wang, Zhixing; Yin, Xing Materials Letters, Vol. 110 https://doi.org/10.1016/j.matlet.2013.07.098	journal	November 2013
Significantly improving cycling performance of cathodes in lithium ion batteries: The effect of Al2O3 and LiAlO2 coatings on LiNi0.6Co0.2Mn0.2O2 Liu, Wen; Li, Xifei; Xiong, Dongbin Nano Energy, Vol. 44 https://doi.org/10.1016/j.nanoen.2017.11.010	journal	February 2018
A Mg-Doped High-Nickel Layered Oxide Cathode Enabling Safer, High-Energy-Density Li-Ion Batteries Xie, Qiang; Li, Wangda; Manthiram, Arumugam Chemistry of Materials, Vol. 31, Issue 3 https://doi.org/10.1021/acs.chemmater.8b03900	journal	January 2019
Surface Modification for Suppressing Interfacial Parasitic Reactions of a Nickel-Rich Lithium-Ion Cathode Gao, Han; Cai, Jiyu; Xu, Gui-Liang Chemistry of Materials, Vol. 31, Issue 8 https://doi.org/10.1021/acs.chemmater.8b04200	journal	March 2019
Chemical versus Electrochemical Electrolyte Oxidation on NMC111, NMC622, NMC811, LNMO, and Conductive Carbon Jung, Roland; Metzger, Michael; Maglia, Filippo The Journal of Physical Chemistry Letters, Vol. 8, Issue 19 https://doi.org/10.1021/acs.jpclett.7b01927	journal	September 2017
A New Coating Method for Alleviating Surface Degradation of LiNi _0.6 Co _0.2 Mn _0.2 O ₂ Cathode Material: Nanoscale Surface Treatment of Primary Particles Kim, Hyejung; Kim, Min Gyu; Jeong, Hu Young Nano Letters, Vol. 15, Issue 3 https://doi.org/10.1021/acs.nanolett.5b00045	journal	February 2015
Stabilized Behavior of LiNi _0.85 Co _0.10 Mn _0.05 O ₂ Cathode Materials Induced by Their Treatment with SO ₂ Susai, Francis Amalraj; Sclar, Hadar; Maiti, Sandipan ACS Applied Energy Materials, Vol. 3, Issue 4 https://doi.org/10.1021/acsaem.0c00098	journal	March 2020
Investigating the Compatibility of TTMSP and FEC Electrolyte Additives for LiNi_0.5Mn_0.3Co_0.2O₂ (NMC)–Silicon Lithium-Ion Batteries Haridas, Anulekha K.; Nguyen, Quan Anh; Terlier, Tanguy ACS Applied Materials & Interfaces, Vol. 13, Issue 2 https://doi.org/10.1021/acsami.0c19347	journal	January 2021
Facile Fabrication of Ethoxy-Functional Polysiloxane Wrapped LiNi _0.6 Co _0.2 Mn _0.2 O ₂ Cathode with Improved Cycling Performance for Rechargeable Li-Ion Battery Wang, Hao; Ge, Wujie; Li, Wen ACS Applied Materials & Interfaces, Vol. 8, Issue 28 https://doi.org/10.1021/acsami.6b04644	journal	July 2016
Targeted Synthesis of Unique Nickel Sulfide (NiS, NiS ₂ ) Microarchitectures and the Applications for the Enhanced Water Splitting System Luo, Pan; Zhang, Huijuan; Liu, Li ACS Applied Materials & Interfaces, Vol. 9, Issue 3 https://doi.org/10.1021/acsami.6b13984	journal	January 2017
Surface Modification of Ni-Rich LiNi _0.8 Co _0.1 Mn _0.1 O ₂ Cathode Material by Tungsten Oxide Coating for Improved Electrochemical Performance in Lithium-Ion Batteries Becker, Dina; Börner, Markus; Nölle, Roman ACS Applied Materials & Interfaces, Vol. 11, Issue 20 https://doi.org/10.1021/acsami.9b02889	journal	April 2019
Investigation of the Nanocrystal CoS₂ Embedded in 3D Honeycomb-like Graphitic Carbon with a Synergistic Effect for High-Performance Lithium Sulfur Batteries Ai, Guo; Hu, Qianqian; Zhang, Liang ACS Applied Materials & Interfaces, Vol. 11, Issue 37 https://doi.org/10.1021/acsami.9b11561	journal	August 2019
Boosting the Electrochemical Performance of Li _1.2 Mn _0.54 Ni _0.13 Co _0.13 O ₂ by Atomic Layer-Deposited CeO ₂ Coating Gao, Yan; Patel, Rajankumar L.; Shen, Kuan-Yu ACS Omega, Vol. 3, Issue 1 https://doi.org/10.1021/acsomega.7b01922	journal	January 2018
Structural Changes and Thermal Stability of Charged LiNi _x Mn _y Co _z O ₂ Cathode Materials Studied by Combined In Situ Time-Resolved XRD and Mass Spectroscopy Bak, Seong-Min; Hu, Enyuan; Zhou, Yongning ACS Applied Materials & Interfaces, Vol. 6, Issue 24 https://doi.org/10.1021/am506712c	journal	December 2014
Role of Alumina Coating on Li−Ni−Co−Mn−O Particles as Positive Electrode Material for Lithium-Ion Batteries Myung, Seung-Taek; Izumi, Kentarou; Komaba, Shinichi Chemistry of Materials, Vol. 17, Issue 14, p. 3695-3704 https://doi.org/10.1021/cm050566s	journal	July 2005
Electrochemical (De)Lithiation of 1D Sulfur Chains in Li–S Batteries: A Model System Study Yang, Chun-Peng; Yin, Ya-Xia; Guo, Yu-Guo Journal of the American Chemical Society, Vol. 137, Issue 6 https://doi.org/10.1021/ja513009v	journal	February 2015
First Evidence of Manganese–Nickel Segregation and Densification upon Cycling in Li-Rich Layered Oxides for Lithium Batteries Boulineau, Adrien; Simonin, Loïc; Colin, Jean-François Nano Letters, Vol. 13, Issue 8 https://doi.org/10.1021/nl4019275	journal	July 2013
Vapor-Phase Atomic-Controllable Growth of Amorphous Li ₂ S for High-Performance Lithium–Sulfur Batteries Meng, Xiangbo; Comstock, David J.; Fister, Timothy T. ACS Nano, Vol. 8, Issue 10 https://doi.org/10.1021/nn505480w	journal	October 2014
Intragranular cracking as a critical barrier for high-voltage usage of layer-structured cathode for lithium-ion batteries Yan, Pengfei; Zheng, Jianming; Gu, Meng Nature Communications, Vol. 8, Issue 1 https://doi.org/10.1038/ncomms14101	journal	January 2017
Achieving three-dimensional lithium sulfide growth in lithium-sulfur batteries using high-donor-number anions Chu, Hyunwon; Noh, Hyungjun; Kim, Yun-Jung Nature Communications, Vol. 10, Issue 1 https://doi.org/10.1038/s41467-018-07975-4	journal	January 2019
Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries Yan, Pengfei; Zheng, Jianming; Liu, Jian Nature Energy, Vol. 3, Issue 7 https://doi.org/10.1038/s41560-018-0191-3	journal	June 2018
Ionic shield for polysulfides towards highly-stable lithium–sulfur batteries Huang, Jia-Qi; Zhang, Qiang; Peng, Hong-Jie Energy Environ. Sci., Vol. 7, Issue 1 https://doi.org/10.1039/C3EE42223B	journal	January 2014
Understanding the degradation mechanism of rechargeable lithium/sulfur cells: a comprehensive study of the sulfur–graphene oxide cathode after discharge–charge cycling Feng, Xuefei; Song, Min-Kyu; Stolte, Wayne C. Phys. Chem. Chem. Phys., Vol. 16, Issue 32 https://doi.org/10.1039/C4CP01341G	journal	January 2014
The Li–S battery: an investigation of redox shuttle and self-discharge behaviour with LiNO ₃ -containing electrolytes Lacey, Matthew J.; Yalamanchili, Anurag; Maibach, Julia RSC Advances, Vol. 6, Issue 5 https://doi.org/10.1039/C5RA23635E	journal	January 2016
Stabilizing nickel-rich layered cathode materials by a high-charge cation doping strategy: zirconium-doped LiNi _0.6 Co _0.2 Mn _0.2 O ₂ Schipper, Florian; Dixit, Mudit; Kovacheva, Daniela Journal of Materials Chemistry A, Vol. 4, Issue 41 https://doi.org/10.1039/C6TA06740A	journal	January 2016
An overview of molecular layer deposition for organic and organic–inorganic hybrid materials: mechanisms, growth characteristics, and promising applications Meng, Xiangbo Journal of Materials Chemistry A, Vol. 5, Issue 35 https://doi.org/10.1039/C7TA04449F	journal	January 2017
A self-powered broadband photodetector based on an n-Si(111)/p-NiO heterojunction with high photosensitivity and enhanced external quantum efficiency Zhang, Yongfang; Ji, Tao; Zhang, Wenlong Journal of Materials Chemistry C, Vol. 5, Issue 47 https://doi.org/10.1039/C7TC04565D	journal	January 2017
Scalable solid-state synthesis of MoS₂–NiS₂/graphene nanohybrids as bifunctional electrocatalysts for enhanced overall water splitting Lonkar, Sunil P.; Pillai, Vishnu V.; Alhassan, Saeed M. Materials Advances, Vol. 1, Issue 4 https://doi.org/10.1039/D0MA00192A	journal	January 2020
Li–S batteries: simple approaches for superior performance Demir-Cakan, Rezan; Morcrette, Mathieu Energy & Environmental Science, Vol. 6, Issue 1 https://doi.org/10.1039/c2ee23411d	journal	January 2012
High-capacity Li2S–graphene oxide composite cathodes with stable cycling performance Seh, Zhi Wei; Wang, Haotian; Liu, Nian Chemical Science, Vol. 5, Issue 4 https://doi.org/10.1039/c3sc52789a	journal	January 2014
High-performance all-solid-state batteries enabled by salt bonding to perovskite in poly(ethylene oxide) Xu, Henghui; Chien, Po-Hsiu; Shi, Jianjian Proceedings of the National Academy of Sciences, Vol. 116, Issue 38 https://doi.org/10.1073/pnas.1907507116	journal	August 2019
On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries Aurbach, Doron; Pollak, Elad; Elazari, Ran Journal of The Electrochemical Society, Vol. 156, Issue 8, p. A694-A702 https://doi.org/10.1149/1.3148721	journal	January 2009
Optimizing Electrolyte Additive Loadings in NMC532/Graphite Cells: Vinylene Carbonate and Ethylene Sulfate Taskovic, T.; Thompson, L. M.; Eldesoky, A. Journal of The Electrochemical Society, Vol. 168, Issue 1 https://doi.org/10.1149/1945-7111/abd833	journal	January 2021
Oxygen Release and Its Effect on the Cycling Stability of LiNi _x Mn _y Co _z O ₂ (NMC) Cathode Materials for Li-Ion Batteries Jung, Roland; Metzger, Michael; Maglia, Filippo Journal of The Electrochemical Society, Vol. 164, Issue 7 https://doi.org/10.1149/2.0021707jes	journal	January 2017
Elemental Sulfur as a Cathode Additive for Enhanced Rate Capability of Layered Lithium Transition Metal Oxides Zhang, Sheng S.; Chen, Ji; Wang, Chunsheng Journal of The Electrochemical Society, Vol. 166, Issue 4 https://doi.org/10.1149/2.0101904jes	journal	January 2019
Voltage Fade of Layered Oxides: Its Measurement and Impact on Energy Density Bettge, Martin; Li, Yan; Gallagher, Kevin Journal of The Electrochemical Society, Vol. 160, Issue 11 https://doi.org/10.1149/2.034311jes	journal	January 2013
Solid Electrolyte Interphase Film on Lithium Metal Anode in Mixed-Salt System Eijima, Sho; Sonoki, Hidetoshi; Matsumoto, Mitsuhiro Journal of The Electrochemical Society, Vol. 166, Issue 3 https://doi.org/10.1149/2.0611903jes	journal	January 2019
Atomic and molecular layer deposition in pursuing better batteries Meng, Xiangbo Journal of Materials Research, Vol. 36, Issue 1 https://doi.org/10.1557/s43578-020-00054-9	journal	January 2021
Lithium Intercalation into Graphene Ribbons of Glassy Carbon Wu, Yun International Journal of Electrochemical Science https://doi.org/10.20964/2017.02.48	journal	February 2017
Molecular Layer Deposition of Crosslinked Polymeric Lithicone for Superior Lithium Metal Anodes Meng, Xiangbo; Lau, Kah Chun; Zhou, Hua Energy Material Advances, Vol. 2021 https://doi.org/10.34133/2021/9786201	journal	January 2021

Similar Records

Atomic-scale constituting stable interface for improved LiNi_0.6Mn_0.2Co_0.2O₂ cathodes of lithium-ion batteries

Journal Article · Wed Dec 23 19:00:00 EST 2020 · Nanotechnology · OSTI ID:1760109

Related Subjects

36 MATERIALS SCIENCE
Atomic layer deposition
Interfacial reactions
Lithium sulfide
Microcracking
Nickel-rich cathodes
Phase transition

High-performance LiNi0.8Mn0.1Co0.1O2 cathode by nanoscale lithium sulfide coating via atomic layer deposition

Citation Formats

References (76)

Similar Records

Related Subjects

High-performance LiNi_0.8Mn_0.1Co_0.1O₂ cathode by nanoscale lithium sulfide coating via atomic layer deposition