Skip to main content
U.S. Department of Energy
Office of Scientific and Technical Information

Development and testing of a solar flux heating freeze recovery system for molten salt parabolic troughs

Conference · · AIP Conference Proceedings SOLARPACES 2020: 26th International Conference on Concentrating Solar Power and Chemical Energy Systems
DOI:https://doi.org/10.1063/5.0087108· OSTI ID:1883549

A major obstacle preventing commercialization of molten salt parabolic trough plants is freeze protection and recovery of the solar field. One of the most common nitrate salt compositions under consideration allows for solar field outlet temperatures up to 565°C and begins solidifying above 240°C. Using molten salt directly in the solar field can significantly reduce thermal energy storage costs and the higher temperature compared to oil heat transfer fluids can power a more efficient power cycle, but the very high freezing point is cause for concern. This work builds on a previous modeling effort investigating different methods for melting Solar Salt frozen in the solar field, which suggested the viability of a novel solar heating method to lower costs of the freeze protection system. In this work higher fidelity models are developed to better investigate the melting process with a more detailed 3D geometry which includes the insulated bellows. The thermal-fluid model of the melting process is updated to include temperature dependent density and data for solid phase properties. In addition, a finite element model is developed to resolve thermal stresses at the point with highest thermal gradients. Results with the new model confirm the viability of using controllable solar flux heating to thaw salt frozen in the solar field without damaging the receiver; however, the presence of non-illuminated sections significantly slows down the melting process. Solar heating simulations with pauses off-sun of 120 and 60 s require 18.5 and 11.9 h to melt salt from a night-time temperature of 10°C with 1000 W m2 DNI, which results in maximum thermal stresses of 48.2 and 53.5 MPa, respectively. Adding 150 W m−1 to the solar heating simulation with a 60 s pause off-sun decreases both the melt time and thermal stresses due to the more uniform heating, suggesting a combined heating method may be the best option.

Research Organization:
Solar Dynamics LLC
Sponsoring Organization:
USDOE Office of Energy Efficiency and Renewable Energy (EERE), Renewable Power Office. Solar Energy Technologies Office
Contributing Organization:
Solar Dynamics LLC, 1105 W 11th Ct, Broomfield, CO, 80020, USA Virtualmech, Parque Empresarial Torneo c/ Arquitectura 1, Torre 6, Planta 10ª, 41015, Seville, Spain Dept. of Applied Mathematics II. University of Seville. Camino de los Descubrimientos s/n, 41092, Seville, Spain
DOE Contract Number:
EE0008140
OSTI ID:
1883549
Journal Information:
AIP Conference Proceedings SOLARPACES 2020: 26th International Conference on Concentrating Solar Power and Chemical Energy Systems, Journal Name: AIP Conference Proceedings SOLARPACES 2020: 26th International Conference on Concentrating Solar Power and Chemical Energy Systems; ISSN 0094-243X
Country of Publication:
United States
Language:
English

Similar Records

Controllable Solar Flux Heating for Freeze Recovery in Molten Salt Parabolic Trough Collectors
Journal Article · Fri Jun 12 00:00:00 EDT 2020 · Journal of Energy Resources Technology · OSTI ID:1660189

SMART: Simplified Melting And Rotation-joint Technology
Technical Report · Thu Aug 18 00:00:00 EDT 2022 · OSTI ID:1882508